How to remove intake manifold on a 96 Chevrolet Beretta Z26

pat murray

• 293 Answers
• Posted on Oct 23, 2008

SOURCE: 1998 chevy tahoe 5.7 intake manifold removal

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008effd
this should help

SOURCE: Where is the air door actuator? The air flow will

The Heater/Defrost actuator is located on the right side of the HVAC housing under the right side of the dash. It is vacuum operated.

90% of the time, when the mode doors do not work it is because the vacuum line in the engine compartment is broken or disconnected. The second most likely cause of the problem is a leaking vacuum selector switch located within the control head assembly. (This switch is available by itself, you don't have to replace the entire control head.)

Failure of the actuators themselves is possible, but rare.

SOURCE: I need a picture or list of fuses

Usually there is a sticker on the back side of the fuse cover showing the fuse locations. Look in the owners manual that's in the glove box (if you have one), that will also show the list.

SOURCE: 96 acura 3.2tl thermostat replacement. does the

should just be able to unbolt the housing that your top radiator hose goes to and put it in

SOURCE: 1996 Beretta Z26 Antifreeze Leak

You should run the engine and watch it to see if you can see where the leak is coming from, it is most likely coming from a hose or the water pump.