SOURCE: Rear Bumper Cover
you would need to heat it up from behind to remove the dent and the rubbing compound should work as long as it hasnt penetrated your paint layer
SOURCE: I have a 2002 Ford Taurus and we need to replace
for the most part you only need a screwdriver and a pair needle nose pliers try these websites www.alldatadiy.com also www.taurusclub.com wish you the best of luck Michigan Man.
SOURCE: 2008 ford escape. removal of rear bumper cover
Pop the Hatchback open and remove the connectors
from the top of the bumper cover.
Optional Step: Using a Floor Jack, raise both sides
of the car in the back, supporting both sides with
jack stands, and remove the rear wheels.
Using Torx Bits, remove the inner rear wheel well
lining.
Get behind the rear wheel well and loosen the bolts
holding the bumper brackets on. They're pretty
difficult to find and remove. Be Patient. Do the
same to the other side.
Remove the rear bumper cover by pulling the cover
outward from the part nearest the wheel on both
sides. Once removed, take off the 2 black mounting
brackets from the bumper cover.
Good Luck
125 views
Usually answered in minutes!
×