SOURCE: tranny
Hello rvkenneljmil: My name is Roger I can help you. You did not say what transmission you were asking about. GM used 3 different transmissions. The automatic was a 700Ra. The standard transmissions were a Borg warner and one made by Isuzu. The MW1 was made by Borg warner had a bolt up bel housing.The transmission bolts to it.The Isuzu transmission is a two piece transmission. The bell housing and one half of the transmission case are one piece. Depending on the transmission make sure you use the correct fluid in them. 90wt gear oil in the Isuzu transmission will destroy the bearings.The code numbers for the Isuzu is MG5/MY2/M50. Please rate the quality of the information you received. This is how we track that you received the answer you wanted. Thank You for using FixYa.Roger
SOURCE: i have a 89 gmc jimmy s15 everything works on the except the spee
if it is cable driven, then unplug it at the trans an spin the inside of the cable with a drill at slow speed and see if the speed moves, if not then change the cable.
SOURCE: were is a 1984 gmc jimmy fuse box located?
the fuse box should be located near or behind the emergency brake, the panel should have one screw
SOURCE: need to know where the vacuum lines for the 4l60e
94 chev truck 4x4 350 put new injectors in now it idles to fast what to do (trottle body)
79 views
Usually answered in minutes!
×