How hard is it to change ball joints and tie rods on a 1993 g20 Chevy van
I have a friend that replaced his own rack-and-pinion on his Chev wagon in his driveway. Check Youtube or get a Chilton from your local library.
Tie rods are not hard or expensive. Ball joints are much more difficult to do but not expensive. You would need some speical tools a tie rod end separator a ball joint sepatator and a ball joint press witch you could rent or sometimes if you buy the parts at the store just give a dopisit and then bring it back clean and undamaged and get your money back.But if you are going to do this due it all the center link look at the joint on the pitman arm check wheel bearings . Have a good plan and it will last .
137 views
Usually answered in minutes!
×