Is a fuse for speakers on 2007 Chevy 2500HD? - Chevrolet Cars & Trucks

It's in betweenthe inner fender and the fender itself. You have to take the front of the inner fender loose to find it. Your fuse or horn relay may be bad. relays are interchangable.

the braking system is not installed a the factory just the wire from the plug to the fire wall you need to add the fuse and control box

The main fuse box is under the hood on driver side.
There's another on the side of the dash on driver side. Open the door and look right on the side and you'll see the cover. Diagram inside. The 12v lighter is one of the "aux pwr" 20amp fuses.
There's a fuse puller on the inside of the cover along with some spare fuses.

There is a Fuse that is labeled (hzd, or Hazard ) remove it for 15 sec. and return to position it should reset the whole system then check and see if it goes back to original operation good luck

give the wheel a bang with a hammer they arejust stuck with rust

Put in tighten bolts. Each bolt little at a time moving equally between each bolt. You don't want to overtighten one bolt to much and cause it to go in at an angle. Be sure that it's tight. Air tools are the best choice but if you don't have any take time and use a braker bar to make sure it's good and tight.

If you look in the under hood fuse block you will find the rt turn trailer fuse is probably blown. I hope this helps. If you need more help related to this problem or others let me know.
Thank You,
Roy

vent tube must be blocked off, check the tube first, thanks robert b.

check fuse .if fuse good you got a bad ground.

How to set the clock on a Plane Jane Chevy 2500.