At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Sometimes when I put the turn signals on they work and other times they don't. A friend said it was a ground problem.. any help would be greatly appreciated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Flashing too fast means that at least one exterior bulb isn't working. IF its an intermittent problem, once bulb could not be making connection at times. next time its flashing fast, stop the car and look to see which bulb isn't working. Replace that bulb, clean the socket at the same time
you don`t say what kind of car you have. there are turn signal cancelling lobes on the turn signal switch and sometimes they are cancelling springs that are pushed back when turning to cancel the signals. sometimes they break and require replacing, sometimes you have to replace the signal switch itself.
sometime the combination switch can cause this problem , alot of times u can turn your hazard lite switch on and off a couple of times and the turn signals will go back to working ,
Ok so whats has happend in this case is inside the steering colum your turn siginals headlamp lights switch wipers are all connected on a plastic peice with metal terminals and wires to each switch.
What happend is you have a short in that plastic peice its common in some cars but that is it
PS i have put some pics of a colum from ford crown vic just to kinda give you and idea
IF it helps please leave 4 thumbs up helps me help you
hi there , there must be a fried wire in the relay box were the two relays are for the turn signals. or a bad relays and the other acts for both . hope this could help ya.
×