I have 1994 Mazda b2300,,, i did a motor swap to the similar motor ,,, wel its starts n runs like a champ but the problems is ,, that it bloggs down like really low everyything works fine but even the A/c works im tired ,,
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
What the P0411 code means. P0411 indicates that the ECU has detected the flow from the secondary air injection system to be out-of-specification. This causes the Check Engine Light to be set and displayed on the dashboard.
There is a fuel pump "roll over" valve in the floorboard on the passenger side. It stops the fuel pump from running incase you roll the vehicle to prevent a fire. Check that the switch didn't trip from someone possibly kicking it or something. Then check any fuses or relays (swap relays if you have a spare or switch with the same on in a different slot). If everything checks out ok, then you probably need a fuel pump
If you threw a rod,This would be a total engine rebuild.(Cost vary by location)
You can use the Ranger motor ,but you will need to swap most of the accessories from the Mazda motor so the wiring harnesses match up.
The light is on because there is a problem in the transmission, have a self test run by Kragen auto or a store like them, they do it for free, let me know the codes.
×