SOURCE: 1999 land rover discovery series 1 does not hold charge.
Maybe,
Terminals are old POS that no longer conduct. Hit your local auto parts store and buy some new Terminals. Get something that Is a strong Conductor. I suggest Brass. Also Its Important to get the right size Terminal. I would also put money on your Main Power Wires being real heavy gage that will not fit into a generic Terminal. So make sure you get a terminal your gage of wire will easily fit into to avoid head ache and the hacking of your nice heavy gage Into lets say Civic gage to fit a too small terminal which mind your will work However you will have less power weaker connections ultimately Find your self with a car that will not start. It does not hurt to also sand any white crude or rust that would further interupt your new connection, Complete that and she be ready to fire up and hand you your next task.
Good Luck,
SOURCE: water pump land rover discovery td5
http://carservicemanuals.blogspot.com/2008/06/download-land-rover-discovery-workshop.html
GL
SOURCE: sunroof leaks on 2001 land rover discovery
should be a seal issue, not mechanical. Is the roof opening/closing properly? If so, while open examine the weatherstripping and look for damage or abnormal wear. with power roofs, sometimes the movement wears down the sealing abilty pending on its usage or debris hiding inside.
SOURCE: default code P1451 Land Rover Discovery II
The code P1451 on a Land Rover is "Leakage Detection Module Motor power stage error Drive cycle A:Signal out of range - above maximum". This is an OBD-II diagnostic system code. As far as I know, a 1995 Land Rover Discovery does not use a OBD-II system. Is it possible that this rover is a later model year
SOURCE: 2001 land rover discovery II locate fuel filter and fuel pump
If you're standing looking at the rear of the vehicle, it's on the chassis rail on the right hand side rear wheel arch.
92 views
Usually answered in minutes!
×