SOURCE: FORD FOCUS ELECTRIC WINDOW
hello , i hope i could help you with your problem , i have an idea , try to check on the fuse of the bower window , try that if my idea didn't work , contact us again , and thank you for using fixya.
SOURCE: what are the spark plug settings for a 1.8 zetec engine
you can set the gap by using the new spark plug casing papar thikness.try it and it will work
SOURCE: Focus timing belt replacement.
This is a very very easy timing belt setup. first off you have to remove the valve cover. Then you have to remove the serp belt. Then remove anything thats in your way of the front cover. after you remove the crank pulley re-install the crank bolt. DO NOT LOSEN THE BOLT FOR THE TENSIONER!!!! now spin the crankshaft until the sproket aligns with the timing mark. now at this point the two camshafts should be aligned. now there is a special tool from ford that holds the cam shafts in place. all it is is a 1/4" peice of metal that goes on the left side of the cam shafts to hold them into place. if you mark the cams you wont need the tool. or if you can find something to fit in the left side of the cams that will work too. anyways after that its just the same steps in reverse. very easy to do.
SOURCE: how to change the spark plugs on a 1.6 zetec ford
get a plug spanner (more a socket than a spanner) and after removing the plug lead, use the spanner to remove the plug. Do one at a time so you dont get the leads mixed up or it will not start.
Mercedes commans sat nav version 4.1 for E220, is saying off road, and when at home is showing on map that I am somewhere in the National Park Peak District. I have been told to remove fuse for sat nav should be no 28 but in boot of car near sat nav cassette fuses in box only go upto 20. Am I looking in the right place?
54 views
Usually answered in minutes!
×