Where do i find the vin numbers on a ford 1977 f 700 flatbed

The VIN does not designate transmission type. You will need to get the information off of the transmission itself.

Vin is usually visible on drivers side front of dash where it meets windshield. To see it you will probably have to be on the outside of the vehicle looking in

On the WEB
images for vin numbers on the motor of a 1992 Ford

If you have proof of ownership, A Ford dealer can probably help you with the code based on vin number. While I am not familiar with Ford vin numbers the number you have given is not likely to be the to be the vin number that is on your registration or the driver door mfg, plate. The Ford dealer will look up the vin on their system to find the radio code, most likely for free.

if you are going by the vin number the 8th digit is always the engine code this number in the vin will tell you what the engine was at the time of assembly from the factory

Ford moved the "vin tag" around a lot in the 50-60s from door posts, door edge and glove box doors. I'm am not sure exactly when but by the late 50' and 60's ford also stamped the vin number on the frame. They were located on the passenger side about mid engine on the top of the frame rail and also on top of the frame on the same side underneath the cab. This was the secret vin that police and insurance companies looked for on stolen cars as they were not listed in the owners manual or common repair manuals. The one under the cab can be seen with a mirror but is not where it could be filled off or rest amped without removing the cab from the frame. I have restored a 58, 61,65 and 66 ford pickups and all of them had the vin on the frames. I have run across lots of trucks where they simply moves the glove box door or swapped doors to change the vin on a Ford truck or moved the metal I'd tag but it is seldom they remember the frame stamping of the vin. They also all had a star at the beginning and end of the stamping.

1988 Ford F-150 engine is three choice...
4.9 liter L6 VIN "Y"
or
5.0 liter V-8 VIN "N"
or
5.8 liter V-8 VIN "H"

Check it with the VIN number.

Hope helps (remember to rate this answer).

For 2001 Ford Mustang 3.8L SFI 6cyl engine, with which your specific vehicle is equipped, can be most easily identified by the Vehicle Identification Number (VIN), located on either the VIN tag, mounted in the upper left-hand corner of the instrument panel, or on the vehicle certification label, located on the driver-s side door pillar. The engine identifying code is the 8th digit of the VIN. The engine VIN codes are as follows:



FIG: Engine identification codes may also be found on a label affixed to the left side rocker arm cover

4-3.8L SFI (OHV) engine N-4.0L SFI (SOHC) engine H-4.6L SFI (SOHC) engine V-4.6L SFI (DOHC) engine
X-4.6L SFI (SOHC) engine

Hope helps.

Here ya go:


Comments: Jun 29, 2009 - Because I don't know your VIN number/letter:

Jun 29, 2009 - 2001 Ford Taurus
3.0 liter V-6 DOHC VIN "S"

This goes to the one above.
Jun 29, 2009 - This goes to the first photo:

2001 Ford Taurus
3.0 liter V-6 VIN "2" Jun 29, 2009 - Sorry....this goes to the first photo:

2001 Ford Taurus
3.0 liter V-6 VIN "U" Jun 29, 2009 - This is 2001 Ford Taurus
3.0 liter V-6 VIN "2"

It is the same as VIN U:

The Engine Number is Coded Inside the VIN Number. Write it down and Contact your Closest Ford Dealer and they can tell you Just from your VIN Number.