Need a3rd member for 1955 chev pickup with 3.38 gear

Too many differences, would not advise it at all unless you want to fabricate adaptation brackets & parts which would be major mods

not as a bolt in will need to fabricate a few parts and brackets

contact your Hudson auto clubs and see if any members can help. They will be listed on the net. You may have to go to England clubs to get what you want

It has a siolinoid in the transmission that is suppose to gear it back down to 1st gear when slowing down or just pulling it in gear.

With the engine off, try to put it into a gear. If it goes into a gear, then your clutch is bad and needs replaced. If you still can't get it into gear this way, you probably have a busted detent plate which requires the transmission to be removed and serviced.

Try adjusting the Shift linkage

j'aimerai entrer en contacte avec pour l'achat de votre vehicule

Mr Kakou

Check your electonic ignition swith under dash that the ignition acuator rod connects to about $8 part at parts store

Than you problem solved by yourself already,

Dear you had done good job for your dream,

just some modification nedds like,

CHECK YOU ENGINE MOUNTINGS,OR THIGHTEN IT,
YOU HAVE TO ALSO CHECK YOUR PLACEMENTS ORDERS OF YOUR ENGINE THAT NOT TO BE CHENGED AFTER YOUT TRY.

THNX