Watch this video to learn how to locate your Crankshaft Sensor on a 2009 Dodge Caliber. This video represents a 2007 model which is only 2 years apart from your 2009 but the parts and placement should be the same or at least fairly close. https://www.youtube.com/watch?v=CcvCkDjyAYo
SOURCE: Camshaft sensor location
The cam sensor on the 4.7 is located toward the forward edge of the right cylinder head (passenger side). This has a 3 wire connector, tan/with yellow tracer is sensor signal, black / light blue tracer wire is sensor ground and the orange is the 5V supply.
SOURCE: i need an owners manual DODGE CALIBER HATCHBACK
Try to look in this link -->> dodge.com/en/owners/manuals
Hope helps (remember to rate and comment this).
SOURCE: how do I reset the oil light on my 2009 dodge
once oil has been changed turn key to on press the gas pedal 4 times turn key off.the change oil light will reset. ur ready to go.
SOURCE: where is the camshaft sensor on a 2007 dodge caliber?
There should be two sensors. They will be on the side Of the motor that the transmission is bolted to. The intake cam sensor will be on the side of the head closest to the radiator. If you look kind of under the fuel rail you should see it. It will be held in place with a single bolt. A ten mm socket will be neede to remove the bolt. It will also have a two wire connector plugged into it.
The exhaust cam sensor is exactly the same and will be in the same area except on the side of the motor closest to the firewall.
Hope that helps.
Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
2,014 views
Usually answered in minutes!
×