I have a 1991 honda crx is atickshift i want it to convert in automatic transmission for my son, any ideas?

Sounds like a bad transmission.

Is it an automatic or standard? Auto check fluid on stick. Standard trans check couch fluid or maybe you have a bad clutch plate

Brian
I see this is an older post. I have a 90 Crx and was wondering if you still have the car and how you solved the problem?

Hi Ica, I would suggest you go to the dealer, as they would be the most likely to supply it or advise where to get it. Regards John

No , they are different. Manual transmissions require a clutch that engages with flywheel, thus manual transmission flywheel is much thicker/heavier and designed to mate with clutch assembly. Automatic is thinner/lighter as they only have to mate engine to torque converter.

im assuming this is an automatic. Provided that it's full of tranny oil, you may want to try changing the transmission oil and filter. If that doesn't do it, you could try changing the shift / speed sensor.

you would have to check the axle is the same

First make sure you know what your trany came out of . honda did not go hydro until 92 all i do are honda swaps . get on e-bay they offer a kit or you will need clutch master and slave cylinder and the lines out of a doner car .Good luck and hope this helps you!

I don't know much about cars, but I've got a service manual for your care in case you need one. It's BIG, 300mb.

Let me know if you need it.

u need to get a spedo gear out of any cable b series trans and use it then it is a little c clip kinda looks like what holds a door handle on u can find them at any autopart store