At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Top Gear Sometime Does Not Work in auto transmition...
Year, make, and model. But I would look at the TPS sensor, The MAF sensor , the speed sensor, and the MAP sensor. to start with. Could be the TCC solenoid also.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is a transmition problem that will get worse if not got on top of. I would suggest changing the transmition oil. Dirty old oil can cause problems like those you describe.
If it is a manual ****** it is most likely your clutch going out. The most common first sign is slippage with that. If it is an auto ******, you are most likely looking at your transmission starting to fail. It could be something else but those are my best guesses with my experience. Hope it helsp.
did you unplug the battery when the work was been done allowing the car main cpu system to reset itself if not u may have to go to a dealer of your car to have them reset cuz car computer doesent know work was done
I had the same problem I changed the transmission fluid & put a new filter in the trans, this fixed it good until I put my foot down to overtake the trans kicked down to 2nd gear & the hold light started flashing again & the trans started slipping again. I stressed over it for a day or 2 & then I took it out for a drive & thrashed it, Low & behold it came right. When you change fluid its impossible to get all the old fluid out because the torque converter holds a liter or two under pressure, so when I put my foot down some of the gunk blew through & blocked the pump it looses pressure & cant change gear. You need to get it flushed by a transmission specialist
sounds like a burned clutch to me
tran fluid should be pink and lite
touch the stick and feel if fluid has metal or brownish particles.if so Not a good thing for you
Sounds like the trans imput shaft bearing. They tend to wear and cause shifting problems. It also could be synchronizers. Marlin Crawler makes aftermarket trans bearings for these transmisions. www.marlincrawler.com I hope this helps. Also check tranny fluid and clutch. a worn or bad clutch will also cause this.
×