Did check and there is fuel coming threw. But seems there is no spark
3 times posted.
but now no spark
check fuses first.
then spark, at all spark plugs not one,
if all are dead, the scan tool tells you why
scan it now, and stop guessing.
seems, spark is good /bad or weak never seems.
blue /white spark is good, need a video, can do .
is battery in car charged fully>?
my guess, is you dislodged a wire, to a sensor.
cam or crank,.
SOURCE: toyota celica vvti
Leave the jumper connected for about 10 minutes at least to get the
battery some charge. If that doesn't work, wait another 10 minutes.
Remember that when you first connect the jumper cable, the good car is charging the battery AND trying to start the car.
SOURCE: 1990 toyota pickup wont start/turns over no spark or fuel
there may be a bad contact problem check the wire running into the fuse box and look at the relay for the efi
SOURCE: 2000 toyota tacoma 2.4l wont start when cold
clogged injectors you need to put cleaner in the fuel to help get dirt and grit out of them some times (every 3 months).
I am assuming you are saying it will turn over but not fire and run when cold?
SOURCE: 98 s10 cranks but wont start. Checked for spark and fuel press,
Yes It does. There are (or should be) toggle switches to reset security alarm. However, the ignition hot lead passes through the security relay contacts. This relay may be the culprit, in that if it does not pull when ignition key is turned; The start relay will not pull disabling fuel pump and spark.
FixYaWIZ...............saailer
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
SOURCE: 1999 toyota camry wont start
You most likely have no injector pulse,this is caused by a bad cam sensor,or pick up coil,or crankshaft sensor.
115 views
Usually answered in minutes!
×