I removed exhaust rocker arm assembly only, i did not put engine to tdc first and then tried to turn to get to tdc with socket on cranck bolt- have i distroyed my car
SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine
Head Bolts
Step one 37 ft lbs then tignten 120 degrees more
Rocker arms
Step one 11 ft lbs then tighten 90 degresss more
Upper intake
89 inch lbs
Lower intake
132 inch lbs
SOURCE: 1996 timing belt changed, lined up all the marks,
Hi my name is juan and lets try to solve this it is possible that when you rotated the camshaft the distributor last his position and this is why it won't start it may not be the problem but this happens a lot so open your distributor and aline up your marks on camshaft and the crankshaft then make sure the distributor is pointing near the #1 spark plug if is opposite give it a 1 more turn to the crankshaft line up your marks again and se what happens #1 spark plug is the closets to the front part of the engine on 4cil
SOURCE: 2005 Dodge Neon SXT Transmission
Follow throttle valve cable to linkage above shifter cable and linkage. Probably slightly seized and hanging up, causing it to stay in lower gear too long. Hard to see, might have to remove battery and battery tray to get at it good. It has to move freely, and it will usually seize up unless lubed regularly. Should be able to move it easily back and forth by hand. Spray it good with WD-40 or whatever to loosen it up, then coat with white lithium spray grease as well. P.S. do not remove throttle valve linkage (top one) to clean or lube it, otherwise you'll be pulling tranny apart to fix it.
SOURCE: 2004 Dodge Neon SXT, added new battery need code to reset car
if you are the original owner, look in your paperwork. if you cant get to the original owner or they dont have the info, you can go to your dealer, and they can reset it for you. and charge you
or you can just start entering codes till it works, which will take you weeks or more.
good luck
158 views
Usually answered in minutes!
×