Ford territory 05 stability control engaging at low speed

When the Stabilitrak and Traction Control indicators come on and stay illuminated in your 2008 Saturn Outlook, it typically indicates a problem with the vehicle's stability control system. This system helps maintain control and stability during adverse driving conditions, such as wet or slippery roads. There are several potential causes for these warning lights, and it's essential to address the issue promptly to ensure your vehicle's safety and performance. Here are some common reasons for the warning lights to stay on:

1. Wheel Speed Sensor Issues: The Stabilitrak and Traction Control systems rely on information from wheel speed sensors to determine if a wheel is slipping or losing traction. If one of these sensors is malfunctioning or dirty, it can trigger the warning lights.
2. Faulty ABS Module: The Anti-lock Braking System (ABS) module is closely related to the stability control system. If there is a problem with the ABS module, it can affect the functionality of Stabilitrak and Traction Control.
3. Damaged Wiring: Damage to the wiring that connects the wheel speed sensors to the control module can disrupt the communication and trigger the warning lights.
4. Malfunctioning Control Module: The control module responsible for the stability control system can develop faults or errors over time.
5. Brake System Issues: Problems with the vehicle's braking system, including worn brake pads, can sometimes lead to issues with the Stabilitrak system.
6. Faulty Steering Angle Sensor: The steering angle sensor is part of the stability control system. A malfunction in this sensor can lead to warning lights.
7. Low Fluid Levels: Low brake fluid levels can trigger the warning lights, as the stability control system may interpret it as a potential issue with the braking system.

To diagnose and address the problem, you should take your Saturn Outlook to a qualified mechanic or a dealership. They can perform a diagnostic scan using specialized equipment to pinpoint the exact issue that is causing the warning lights to stay on. Once the problem is identified, they can recommend the necessary repairs or replacements.
It's important not to ignore these warning lights, as the stability control system is designed to enhance vehicle safety and performance, particularly in adverse driving conditions. Addressing the issue promptly will help ensure the continued safe operation of your vehicle.

This is accomplished by triggering the hydraulic control unit (HCU) to open and close the appropriate solenoid valves. Once the affected wheel returns to normal speed, the ABS module returns the solenoid valves to their normal position and normal (base) braking resumes. OBDII Code C1155 Ford - Left Front Wheel Speed ...

Which do you have ?
Transfer Case - NVG 236 (Two Speed Automatic)
Transfer Case - NVG 233-NP1 (Two Speed Selectable)
The NV236 transfer case is an automatic transfer case with three drive ranges. Shifting from rear wheel drive to four wheel drive is done automatically when the transfer case shift control module receives wheel rotating slip information from the speed sensors. The transfer case shift control module then engages the transfer case motor/encoder to position the transfer case from rear to four wheel drive. When the transfer case shift control module receives information that the wheel rotation is the same on both axles, the transfer case shift control module sends position information to the motor/encoder to put the transfer case back into rear wheel drive. The three drive ranges are 2HI, 4HI, and 4LO. The 2HI position is for normal driving with the rear wheels pushing the vehicle. The 4HI, position is for driving through sand, snow, mud, gravel, or heavy rain at normal or slightly below normal speeds. The 4HI engages the front axle to allow for four wheel drive. The front axle is pulling the vehicle, and the rear axle is pushing the vehicle. The 4LO range is used for off road driving, heavy snow, deep mud, or shallow fording. The 4LO is similar to the 4HI except that the gearing in the transfer case is set for low speed and high torque. The NV236 is manufactured at Syracuse New York by New Venture Gear a division of New Process Gear for General Motors.
Is the switch light on or flashing ? If you have automatic 4x4 there are several DTC'S that can set >
DTC B2725 ATC Mode Switch Circuit Malfunction DTC C0300 Rear Speed Sensor Malfunction DTC C0305 Front Speed Sensor Malfunction DTC C0308 Motor A/B Circuit Low DTC C0309 Motor A/B Circuit High DTC C0310 Motor A/B Circuit Open DTC C0315 Motor Ground Circuit Open DTC C0323 T-Case Lock Circuit Low DTC C0324 T-Case Lock Circuit High DTC C0327 Encoder Circuit Malfunction DTC C0362 4LO Discrete Output Circuit High DTC C0367 Front Axle Control Circuit High DTC C0374 General System Malfunction DTC C0376 Front/Rear Shaft Speed Mismatch DTC C0387 Unable to Perform Shift DTC C0550 ECU Malfunction DTC C0611 VIN Information Error

Do you mean the RSC light ?

Roll stability control (RSC)/interactive vehicle dynamics (IVD)

Roll Stability Control (RSC)
The roll stability control (RSC) system monitors the roll-rate sensor and existing stability assist sensors and calculates if the vehicle may be approaching a situation where rollover is probable. If such a situation exists, the RSC system applies preemptive action. When activated, the RSC system adjusts the brake torque at specific wheels in response to direct measurement of the vehicle roll motion. By adjusting brake torque, the system can reduce the cornering forces and, therefore, the total roll moment acting on the vehicle. Systems with RSC have an additional roll-rate sensor located within the sensor cluster and additional programming within the ABS module to help control the vehicle during sudden maneuvers.
Information from the roll-rate sensor is fed into the ABS module. The computer uses information from the ABS wheel speed sensors, the throttle position sensor, the steering wheel angle, the steering wheel rate of change and a yaw rate sensor that measures the change in vehicle direction. If the computer determines from all these inputs that conditions exist for a potential roll over, the system applies one or more brakes and reduces engine torque to make the vehicle more stable.
If the event is severe and the driver's foot is not on the brake, the brake pedal moves to apply higher brake forces. A whooshing sound can also be heard from under the instrument panel in an event this severe .
I strongly suggest you have this vehicle towed to a ASE certified repair shop that knows this system !

I have a 2003 GMC it has two buttons to use 4 wheel drive as most all do with push button controls...One is for standard highway driving with 4 wheel drive the other is for 4 wheel drive a low speeds for off road driving and conditions that need low speed less spin driving..not designed for highway use..and must be stopped to engage where 4 speed highway can be shifted on the go..hope this answers your question..good luck..

Sounds like a bad wheel bearing.

4X4

On these issue, there are few solved help links for troubleshooting the issue easily.-------

Click the link below: ---

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------

4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------

Car will not go into 4WD high or 4WD low?

http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------

4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------

4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------

2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------

2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------

4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------

4x4 will not engage on Ford F150?

http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------

Dodge Ram 4x4 light keeps flashing

4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------

Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

It can be faulty 4x4 wd switch.

4X4

On these issue, there are few solved help links for troubleshooting the issue easily.-------

Click the link below: ---

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------

4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------

Car will not go into 4WD high or 4WD low?

http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------

4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------

4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------

2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------

2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------

4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------

4x4 will not engage on Ford F150?

http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------

Dodge Ram 4x4 light keeps flashing

4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------

Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

vibration would have loosened the solder joint on one of the main two leads into the ABS pump on the ABS module.checkout and replace the defective solder, the stability control will work again.