At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
run the fault but all you describe is operated from the VSS sensor ( vehicle speed sensor)
it tells the cruise control the vehicle speed , tells the TCM the vehicle speed so that ratios can be changed, activates the speedo,and will report with a check engine light to report a transmission problem
run the fault codes first
Sounds like a bad speed sensor. Perform an ODBII scan soon. ECU should delay upshift until coolant temp senses warm up. It will not work right unless a signal is present from speed sensor.
you have a valve body problem, some of the speed sonsor controls are malfunctioning... need to get into the valve body... check fluid condition for dirty and burned condition...
I have a 1999 Ram B 1500 Van, auto transmission, 5.9 L engine.
Same problem, trans hesitates in 2-3 upshift, sometimes 1-2
to 2-3 upshift. Posts trouble code P1756 - Transmission Govenor pressure too low at below 15 to 20 Psi. Transmission pump shot or valve body leak stops trans from reaching proper pressure to shift, which is minimum 15 Psi.
Either trans is leaking in valve body, valve is stuck, shift solenoid on valve body is sticking, or pump is shot.
×