How do you remove the center console in my 95 z28 camero

SOURCE: remove center console

look for a set screw at he bottom of the shift lever, unscrew and pull up

SOURCE: my z28 camaro wont start i think it has something to do wit alarm

be more specific... won't turn over, turn over but won't start, do you hear a clicking noise?

SOURCE: I have a 95 z28 Camero with a 5.7 liter engine and

I did mine with MSD wires. Unless you have incredibly small hands, youre going to have to put it on a lift and take out park of the exhast. But you still will have trouble, best bet is to drop the motor. Its alot of work but totally worth it.

SOURCE: Removing sliding hatch in the center console.

You can remove the dash fairly easily. There are a few screws (check by the peddles and open the doors and look there for screws). The rest of the dash just literally pops off. Once that is off you should be able to get to the ashtray/inside the dash to locate said item.

SOURCE: Need to remove center console to replace seat

1. Remove the two oval covers from the sides of the floor console. Remove the four (two on each side) retaining bolts. Lift or remove the front seat center armrest from the floor console.
2. Remove one screw from the top rear end of the floor console (directly under the front seat center armrest.
3. Remove four screws retaining the utility tray beverage holder to floor console. Lift or remove the utility tray beverage holder from the console.
4. Remove two screws (directly under the utility tray beverage holder) retaining the front end of the floor console to the console panel front mounting bracket.
5. Lift the floor console from the front and rear console panel mounting brackets.