Question about 2005 Ford Freestyle

2 Answers

'05 Freestyle Heater/AC blower only works on high(4). How do I get at the switch or blower motor. Everything is plastic! Does anyone have a solution? Thanks, Bob.

Posted by on

  • 1 more comment 
  • 59Fairlane Jul 06, 2009

    Thanks for the info! I,ll try your suggestion tomorrow AM. Will let you know. Bob.
    Braeside, Ontario, Canada.

  • 59Fairlane Jul 06, 2009

    Thank you for your help! I'll get at it in the morning & let you know the result.
    Bob. Braeside, Ontario, Canada.

  • 59Fairlane Jul 12, 2009

    Thanks for the info above! Now I need to know how to remove the lower right panel as it is plastic, (they all are),& I am afraid I might Break it. Is there a special tool or some simple way to remove these panels? Thanks, Bob.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 290 Answers

Here is what my book says:
Blower Motor Speed Control To Remove:

  1. Remove the right lower instrument panel insulator.
  2. Disconnect the electrical connector from the blower motor speed control.
  3. Remove the blower motor speed control mounting screws.
  4. Remove the blower motor speed control.

Posted on Jul 06, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 155 Answers

Sound like your blower resistor is bad if it works on HI and nothing else...you can find that behind the glove box on the heater/a/c assembly, near the motor....hope this helped...GL

Posted on Jul 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2005 Chev Avalanche. The heater blower does not work on the high setting but works fine on settings 1 through 4.


I looked at 05 avalanche 1500--automatic hvac. The blower fuse is hot all the time. The fuse has an input leg and output leg, even if the fuse is blown, the input leg would still have voltage. If no voltage, you could use jumper wire connected to voltage on the output side of fuse cavity to see if blower would work. If you use jumper, use an inline fuse.
Yes, it could be something wrong with fuse box or wiring circuit?

Nov 30, 2017 | Cars & Trucks

1 Answer

Ac blower motor stopped working


YJ car.
the blower is dead. is that it?
does it blow full speed on high
do you have 12v on terminal A of blower , term B is 0v ground
got that, then the blower is dead.
if not 12v, then the controls are bad.
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

page 47
4 parts to make blow
1: fuse 12 good.
2: switch heater /on off.
3: high, med,low speed, use high, its direct.
4: the blower,
one of those points has no 12v on high,
use a simple voltmeter to find the failed point.

Jan 14, 2014 | 1994 Jeep Cherokee

1 Answer

WHERE DO I FIND MY RESISTERS FOR MY HEATER BLOWER SO I CAN REPLACE THEM


Under dash panel,or behind glove box on most of vehicles.

HEATER BLOWER MOTOR


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

1995 Toyota 4 runner airconditioning only works when fan switch set on high


IF BLOWER MOTOR SPEED ONLY WORK ON ONE SPEED.BLOWER MOTOR RESISTOR BAD OR AC/ HEATER CONTROL SWITCH IS BAD.

Sep 09, 2011 | 1995 Toyota 4Runner

1 Answer

Need to replace ac/heater fan resistor I am not sure of the location does anyone know? Thank You


The Blower Motor Resistor is located on the passenger side firewall, not far from your A/C's H-Valve (or expansion valve), going inside of the vehicle. The blower motor resistor has a 4 or 5 way black connector plugged into it and this is the only visible portion of the Resistor you will see. Remove the wiring connector and remove the 2 or 3 screws with an 8 mm or 5/16" socket (8 mm and 5/16" are the same). Once the screws or fasteners are removed, just pull the blower motor resistor out of the firewall and if you look at it, it will have various coils of wire on it, sometimes it will show burnt coils, but you can always check the various coils with an Ohm-meter.

Aside from that, install the new Blower Motor Resistor and Voilà! Your inside Blower Motor should work just fine.

A brief note here, if your fan doesn't work when the fan switch is on High, then it's not the Blower Motor Resistor, but possibly the Blower Motor itself. Should this occur, please get back to me insofar as how to replace the blower motor and why the blower motor's wires have to be twisted...even with the new blower motor fan.

Best of Luck,

"00 Buck"

"Still living on the Right Side of Dirt..."

Jun 05, 2010 | 2001 Dodge Caravan

1 Answer

Ac/ heater fan only works on #4 high . is it the switch or the fan itself ? #1-3 nothing . ac is cold and heater is still hot.


u will need to replace the blower motor resistor, it is located next to the blower motor under the hood on the passenger side

Nov 02, 2009 | 2001 Ford Explorer Sport

2 Answers

Heater blower switch only works in postions 3 and 4


When this happends, it usely is caused by a bad blower motor resister. I can't tell you if it is a seperate unit or if its built into the blower motor . If its a seperate unit it should be located close to the blower on the heater box, if its in the motor you will have to replace the motor.

Sep 16, 2009 | 2004 Ford F150

1 Answer

Heater / AC Blower not working


Check for power and ground at the blower motor.If you have both it's the motor.

Aug 12, 2009 | 2005 Ford Freestyle

3 Answers

Blower speeds on ac/heater for 2003 chevy pickup(v6)


Hi, sounds like your blower motor resistor needs to be replaced. If not the resistor, check the blower motor.

Jul 27, 2009 | 2008 Dodge Ram Pickup 1500

1 Answer

The heater / ac blower only works on high. It is not the blower or the control switch or the blower motor relay. Please help. Thank George


It is the blower resister. I purchasted one at auto zone for $18.00. It is located under the passenger side dash. You need to remove the glove box and the plastic cover under the dash to expose the blower motor. the blower motor resister is right next to the motor. Simply unplug the resister remove the two screws and replace. I did this and now my fan works on all speeds.

Jul 20, 2008 | 2001 Oldsmobile Alero

Not finding what you are looking for?
2005 Ford Freestyle Logo

725 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22483 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...