Question about Ford Cars & Trucks

1 Answer

1993 ford van E 150 will crank over but not start. has compreseion and fuel and spark and timing is on. What else could be issue

Fuel,sensors,timing

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Pull a plug wire, stick a screw driver in the plug wire socket and hold the metal shaft of the screw driver about 1/8 inch from the block. Get someone to turn the ignition key to start and while it is cranking see if you get a spark. If not, look under the front of the truck and locate the "crank trigger" located on the front of the block and going to the area of the crank ballancer. If it looks dirty, the get some contact cleaner and squirt it good and use a tooth brush to clean the trigger and surrounding area of the ballancer where the trigger makes contact, then try starting again.

Posted on Dec 16, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 318 ram van wont start new ecm sensors got spark gas


If you are getting spark to the plugs and fuel spray, and you have compression and the spark is at the right time, you should have explosion.
Is it possible the valve timing is off - timing chain issues ?
Are the new plugs fuel-fouled ?

Jul 06, 2012 | 1999 Dodge Ram

1 Answer

89 F-150 5.0 EFI I got spark, Got fuel, Turns over but Wont start...Any ideas?


if truck does not start it sounds like a bad crank sensor! have it scanned to be sure. a bad crank sensor as it controls timing more than likely engine will not start at all. engine back fire or irregular rpm function. no start and no pulse to injectors, car will stall when stopped. p0335 to p0342 are the sensor problem codes.

Aug 21, 2010 | 1989 Ford F 150

1 Answer

1993 ford econoline 150 has misfire and black


there are two or three things that can cause black smoke on a six cylinder van.a bad fuel pressure regulator is one.it is located on the fuel rail. it is silver and has red vacuum line attached to it. remove the hose and see if fuel comes out of the regulator, if so replace the regulator. next a bad map sensor can cause black smoke. it is located under the hood.bolted to the firewall. its a black square plastic object with a wire connector attached to it, also it may have a vacuum hose attached to it. if it has a hose see if the hose is broken. otherwise just unplug the map sensor see if it changes the idle. if it does than chances are the sensor is good. you could have a bad injector also. disconnect spark plug wires one at a time. if one of them does not change than that injector maybe bad. thats all i can help with. good luck.

Mar 14, 2010 | 1993 Ford Econoline

3 Answers

1998 Ford F-150 4.2 V6 starts and idles fine ibut bogs when step


i had a van do this same thing to a tee turned out to be a broken key pin in the harmonic balencer causing the timing to ****** replaced balencer and ran like a dream there is a crank sensor grid on the balencer when the key pin broke it trew the timing off

Feb 28, 2010 | 1998 Ford F150 Regular Cab

1 Answer

I have a 06 ford f 150 xl with the 4.6 v 8. truck


you need to verify if you have spark or not,or if your missing fuel pressure or not,before you start throwing parts at it

Jan 26, 2010 | 2006 Ford F-150

4 Answers

My chevy express van 1500 cranks but wont start


test and see if you have spark and fuel preasure, you may have bad feul pump, common problem is the fuel pump goes bad, but check before replacing.

Oct 01, 2009 | 2000 Chevrolet Express Cargo

1 Answer

94 econoline 150 van dont start


may be your fuel nozzles are clogged did you checked tham ? or may be your fuel filter is clogged that prevents sufficent amount of fuel comming to your engine

May 31, 2009 | 1994 Ford Econoline

1 Answer

Got a PO118 code for my 1996 ford Econo 150 van.


I work for Ford and have never seen this code, but the sensor must be on the fuel rail on the top of the engine, vans have a hot stall/hessitation issue from vapor lock, maybe this is part of the fix.

Mar 24, 2009 | 1996 Ford Econoline

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...