Question about 1995 Jeep Wrangler

1 Answer

Hight idle nothing, starts out idleing at proper rpms then it idles around 2500 rpm to 3000rpm

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Bad idle solenoid. Located on throttle body. It's black. Plugs in to wiring cable. You need a torx bit to remove. It's a cheap and easy fix. Also, get some throttle body cleaner and a tooth brush. Saturate the inside of the throttle body with cleaner and scrub out the black soot. Do this with throttle body in wide open position. Be sure to clean the edges of the butterfly good. They soot up and stick preventing throttle body from closing all the way.

Posted on Dec 16, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is proper idle rpm. Idles at 12000 Want to slow down to say 700. Replaced IAC valve ?


you neglected to mention model , make and year but most cars idle around the 950 rpm mark or if earlier (pre1990 ) may be as low as 750 rpms
do not always rely on the dash tacho as they are not exactly accurate at the lower readings
use a mechanical rpm counter for ant settings

Apr 09, 2015 | Cars & Trucks

1 Answer

Have a '99 silverado that will not idle


I would check the idle air control valve that is the what controls rpms

Apr 15, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

98 eclipse 2.0 idles high at 2500 rpms an I just replaced the throttle positioning sensor


sounds like you may have a vacuum leak. any air entering engine not passing through the throttle body will cause engine to race. a whistling sound is sometimes a sign of vacuum leak but not always audible. propane is the recommended method finding leak but I find this unreliable. spraying carb cleaner around suspect areas and listening for a rpm change is more successful. just remember carb cleaner is extremely flammable and caution must be used.

Apr 08, 2013 | Cars & Trucks

1 Answer

Will not idle when cold


Its cold start issues:----
Go through the list of help links mentioned below:----

Click the link :----

Cold start problem and vehicle shudder around 2500 to 3500 rpms
http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html
----------
Low idle when cold out side?
http://repairhelpcenter.blogspot.com/2011/12/low-idle-when-cold-out-side.html
--------------
Ford explorer 4.0 will not idle when cold?
http://technoanswers.blogspot.in/2012/02/ford-explorer-40-will-not-idle-when.html
--------
Automatic transmission shift lever hard to move on cold mornings?
http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html
----------
Car won't start when cold?
http://schematicsdiagram.blogspot.com/2011/12/car-wont-start-when-cold.html
-----------

It can be issue with IAC( idle air control valve) causing the problem.


There are many other possibilities causing these idle issues. Engine idles rough.

There are few help links with solutions to troubleshoot such idle issues.

I suggest you refer the link below and follow its troubleshooting details:------

Click the link below:-----

Ford Expedition IAC valve replacing

http://technoanswers.blogspot.com/2012/12/ford-expedition-iac-valve-replacing.html

Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------

Stumbling and stalling at idle after engine rebuild?

http://schematicsdiagram.blogspot.in/2012/03/stumbling-and-stalling-at-idle-after.html

------------

1999 Ford F-150 Idles rough and quits when gas pedal is pressed less?

http://technoanswers.blogspot.in/2012/01/1999-ford-f-150-idles-rough-and-quits.html

---------

Engine stumbles coming off idle when warm?

http://repairhelpcenter.blogspot.com/2012/01/engine-stumbles-coming-off-idle-when.html

------------------

Erratic idle on car?

http://schematicsdiagram.blogspot.com/2011/12/erratic-idle-on-car.html

-----------


Cold start problem and vehicle shudder around 2500 to 3500 rpms

http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html

----------

Low idle when cold out side?

http://repairhelpcenter.blogspot.com/2011/12/low-idle-when-cold-out-side.html

-----------

GMC Sonoma Stalls and idles low

http://technoanswers.blogspot.com/2012/10/gmc-sonoma-stalls-and-idles-low.html

--------


GMC Idle Air Control (IAC) Valve Replacing?

http://schematicsdiagram.blogspot.com/2011/12/gmc-idle-air-control-iac-valve.html

-------------

1996 Camry intermittent engine failure while idle?

http://repairhelpcenter.blogspot.com/2011/10/1996-camry-intermittent-engine-failure.html

------------

Engine quits at idle?

http://repairhelpcenter.blogspot.com/2011/10/engine-quits-at-idle.html

-----------

Car overheats and Air blows hot at idle?

http://howtobyme.blogspot.com/2011/11/car-overheats-and-air-blows-hot-at-idle.html

---------

High Idle Problem

http://repairhelpcenter.blogspot.com/2012/10/high-idle-problem.html

-------

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

---------

Idle flair is noticed on car? Rough idle? car will not idle? Erratic idle speed?

http://technoanswers.blogspot.in/2012/02/idle-flair-is-noticed-on-car-rough-idle.html

--------

High rpm in neutral? Inconsistant high RPM in neutral?

http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html

-------

Vehicle stumbling at idle and shows code 54?

http://schematicsdiagram.blogspot.in/2012/03/vehicle-stumbling-at-idle-and-shows.html

----------

Rough idle, staling and Erratic shifting?

http://technoanswers.blogspot.in/2012/03/rough-idlestaling-and-erratic-shifting.html

-----------

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

---------

These details will help.

Thanks.

Dec 14, 2012 | 1999 Jeep Wrangler

1 Answer

Start car and the idle goes to 3000 rpm, holds there for around 12 seconds or so and then comes down to around 1200. when driving if stopped and you put the car in park or nuetral the idle will go up to...


it sounds like a vacuum leak to me, my car had the same problem but when i changed the hose that connected the valve cover to the fuel injectors the rpms dropped back down to about 800 rpms

Sep 17, 2010 | 1999 Saturn SL

1 Answer

Engine knock hard over 2500 rpm


Does the oil light come on or the knock occur during the engine warm up after a cold start?
There could be a couple of problems causing the issue. You could have an oil pressure pump or pump pressure regulator sticking. I would have a mechanical oil pressure gauge installed and verify oil pressure at idle and 2500 rpms to make sure oil pressure is in normal ranges.
You could also have excessive piston rod bearing, crankshaft bearing or cam shaft bearing wear that will cause oil pressure to drop too low to prevent the rod knock your hearing at 2500 rpm.
You said a knock and not a ticking noise,so I don't believe a lifter is the issue at 2500 rpm.
Start with the oil pressure check and go from there.
Let me know.
Regards,

Aug 22, 2009 | 1996 Dodge Stratus

1 Answer

2004 Grand Am With High Idling Problems too!


Make sure your throttle cable is not bound up on anything. Also where the throttle cable ends at the throttle body make sure it moves freely and there is nothing obstructing its movement..Rpms are a little too high to be a vacuum leak.

Jun 08, 2009 | 2004 Pontiac Grand Am

1 Answer

Running roug at low idle, smooths out at 2500 rpms


change plug and wire if its been a while most cars have 90000 miles platinum plugs in them.but the wires wear before plugs.so change plugs and wires.+clean fuel injectors .change fuel filter and air filter.if car still run rough your idling to low.have idling check .

Jun 06, 2009 | 2001 Oldsmobile Alero

1 Answer

With clutch pushed-in, RPMs start to go up to around 2000-2500


if it isnt the iac probably the pcv valve positive crankcase vent. it is on a vacuum line somewere under hood. or check the air cleaner, the hose with the small filter underneath the air filter. i take its fuel injected?

Feb 16, 2009 | 1987 Ford F 150

2 Answers

Idle is erratic


I had the same trouble 2 to 3000 rpms. there is a power steering stwich on the bottom of steering pump unplug this and see if your rpms come down. Mine did,you can get a new stwich from rockauto.com for about 60.00. It took me four months and 400.00 to find this out

Nov 12, 2008 | 1999 Isuzu Rodeo

Not finding what you are looking for?
1995 Jeep Wrangler Logo

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...