Question about Cars & Trucks

Open Question

I am missing the wall mounting bracket for my Revlon model RV976 mirror

I need the bracket that attaches to the wall.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75051 Answers

SOURCE: caliper bracket torque unknown

45 foot pounds

Posted on Apr 20, 2009

AaronTech
  • 115 Answers

SOURCE: toyota avalon inside rear view mirror came off of mount

sliding the rear view mirror onto the metal tab on the window. look at the part of the mirror that slides over the peice on the window. one end is open and has grooves on the side. you have to put the base of the mirror above the metal mount and flat against the window then slide it down over the mount. there may be a screw to hold it in place.

Posted on Jun 25, 2009

  • 1 Answer

SOURCE: the inside rear view mirror fell off I need to re=attach it

The button is locked into the mirror shoe by a flat spring. Find the notch at the bottom of the shoe and insert a small flat screwdriver to push the spring away from the button. Some force may be required.

Posted on Aug 04, 2009

  • 1 Answer

SOURCE: Buick LeSabre side mirror

Yes, you will have to take the door panel off. I'm attempting to replace the passenger side mirror at the moment and have the old one out, but can't get enough access to the bolts to attach the new one without opening up the side panel.
I'm still looking into how to do this, as I haven't found the right sequence for removing it. I'll try to post how when I figure it out, as I also hate paying for a manual for simple repairs.

Posted on Dec 29, 2009

  • 264 Answers

SOURCE: 1995 Olds 98 Regency Elite I'm re-attaching rear

there is a small set screw in the base of the mirror you will need to loosen this and then slide the metal plate out.

Posted on Aug 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I CHANGE INSIDE REAR VIEW MIRROR PLEASE


If it is mounted on the windshield, the mirror is attached to a bracket that is glued top the glass. You will see a small set screw at the base of the bracket. Most likely an Allen screw. Loosen the screw and slide the mirror up off the bracket.

Feb 25, 2016 | 2008 Peugeot 207 GTi

2 Answers

I cannot locate petrol filter on toyota corolla 160i gle 1997 model


Hello my friend,
the only petrol filter is fixed directly with the petrol pump under the back seat so if its need change you must change the petrol pump , or attach one directly near the engine...

Feb 22, 2013 | 1997 Toyota Corolla

1 Answer

Hang mirror large one so it w


a wall mirror? find the wall studs under the wallboard with a stud finder.. and attach the mirror with heavy hardware which will handle the weight of the mirror.. in some cases a short cable used with the frame will allow for leveling adjustment or you can put wood crossbraces on the wall attatched to the studs the same way and mount the mirror frame on the crossbraces..

Jan 21, 2013 | Cars & Trucks

2 Answers

I cant remove the rearview mirror button to fix it. There is some sort of a clip holding that piece in the rear view mirror and in order to re attach the mirror to the windshield you have to get that piece...


Hi Teresa,

Yes, you are correct. The mirror bracket (the small piece - see picture below) has to come out of the mirror stem in order to get the thing glued back on to the windshield.

MOST GM vehicles have either a Hex or Torx head screw that holds onto the bracket. (see picture below)

If your mirror does not have this screw, then it is held by a spring clip (which is what I think you are describing). If this is the case, look at the bottom edge of the mirror stem/bracket assembly. There will be a small hole (slot) between the mirror stem and the mirror bracket. Take a paper clip and shove it as far as possible up in the hole. This will push and hold the spring clip back so you can slide the bracket out of the mirror stem. Please note that you are only trying to get the paper clip BETWEEN the spring clip and the bracket - the spring clip does not come out of the mirror stem assembly without breaking things. (Sorry, I do not have a picture of this type of fixture)

When you go to glue the bracket onto the windshield, make sure that all of the old glue is cleaned off first. A razor blade works well for this task. Then follow the directions in your mirror glue kit for applying the primer and glue.

Make sure the bracket is oriented correctly when you stick it to the windshield. Some mirror glues are very unforgiving and will stick almost instantly, making corrections nearly impossible.

One more hint: If the old glue (or the outline of the old glue) is still on the windshield, use a "sharpie" pen to trace around it on the OUTSIDE of the windshield. This will serve as a "locator" once you have cleaned and primed the windshield in preparation for the bracket to get glued. The pen mark can be cleaned off with regular windshield washer fluid when you are finished.



10_17_2011_6_34_50_am.jpg

10_17_2011_6_35_25_am.jpg

Oct 17, 2011 | 1999 GMC Sonoma

5 Answers

Rear view mirrior fell off.....how to you put it back?


Auto parts stores sell "Rear view mirror adhesive" - special glue for mirrors. TIP: Follow instructions to the T or you'll be doing it over.

Mar 15, 2011 | 2000 Hyundai Accent

1 Answer

What does the main fuel relay look like to replace it went to checker and they gave me a relay and i can't match it under the dash with somthing next to the stering column.


Accually it should be a square or rectangle module that is attached to a bracket mounted to the drivers side wall under the dash.Use a mirror and a flashlight to locate it.

Jul 31, 2010 | 1992 Honda Accord

1 Answer

Electrical connections are intact, but the mirror is missing. Can I just replace the glass? How does it attach?


Normally u can change the mirror assembly rather easily.even with the outside mirror there is a molding piece on inside.remove.behind is 3 bolt holding that mirror bracket on the out side.if power mirror disconnect plug. go to your local salvage yard or call around for a replacement. hope this helps

Nov 24, 2009 | 2003 Toyota Camry

1 Answer

Re-assembly of 99 Blazer mirror to windshield


This is a relatively easy task, the bulk of the work has been for you. The rear view mirror assembly simply slides onto that metal block that was glued to your windshield. Your mirror mount (the part that slides onto the metal bracket) may be cut differently or shaped different from the rest of that part. you simply need to line that up with the metal mount on your windshield. slide the mirror on and tighten down the set screw if you have one. I've listed the steps below

1. find the base mount for your mirror (this is the bottom of the mirror that sits on the windshield)

2. look for a cut out or flat part of the mirror base.

3. line the flat part of the mirror base with the metal mount bracket on the windshield.

4. slide the mirror onto the metal bracket (this may require you to wiggle while you slide the mirror onto the metal bracket).

5. tighten the set screw on the mirror base ( this is important because your mirror will vibrate off the bracket if you don't.

Note some mirrors slide from the bottom of metal mount bracket and some slide from the top. it sort of depends on the manufacturer and/or the way the bracket was installed.

Hope this helps

Aug 04, 2009 | 1998 GMC Jimmy

2 Answers

My rear view mirror has fallen off the windshield and theres no set screw to remove the plate to reattach it to the windshield. 97 lumina


Mine fell off as well. There's a spring clip holding the mirror to the base plate...you need to get a $3 glue kit from Parts America or other parts shop, re glue the base plate, then mount the mirror / reattach the clip.

Aug 12, 2008 | 1995 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...