Question about Cars & Trucks
HI it seems that drive shafts have broken or come loose. this is a common problem,clutch and pressure plate my be faulty.
Posted on Dec 15, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It sounds like it may be something to do with the engine mounts. I had a similiar problem with my 04 d5 and it was down to 2 of the mounts wearing. They have a rubber damper for vibration which can wear out and then the engine moves slightly when its under load and when braking. Best to get it checked out although it sounds a lot worse than it actually is. Apparently the mounts I had fitted were a revised version which are more suited to the job.
Posted on Jun 22, 2009
Most likely you need motor mounts for the shaking and clunking.
The check engine light being on could cause the accelerating problem. It could be something as simple as the fuel filter being old and plugged up. Have you ever changed the fuel filter? This could cause the engine to run lean making the check engine light come on. And when accelerating the engine will be "starving" for fuel causing poor acceleration.
Posted on Apr 23, 2009
go to an empty parking lot
turn the wheel all the way to the right and drive in circle slowly
listen for a ticking noise or similar.
repeat in the left direction.
if you hear a ticking or clicking noise you likely have a bad CV joint. not a horridly expensive repair tho a necessary one
one other thing that will cause it is if the rubber boot surrounding the CV
joint is torn.
pleae take a moment to rate this solution.
Posted on Sep 04, 2009
2001 Saturn SL1. Transmission (automatic) shifts hard when putting it in gear and every gear there after. The only codes I get is PO442 and PO410. Any help would be greatly appreciated.
Posted on Apr 29, 2011
Tips for a great answer:
May 21, 2011 | 1999 Oldsmobile Alero
Jun 15, 2010 | 2000 Volkswagen Cabrio
Dec 24, 2009 | 1999 Volkswagen Cabrio
Mar 17, 2009 | 2000 Volkswagen Cabrio
Dec 30, 2008 | 1992 Acura Integra Hatchback
Oct 01, 2008 | 1998 Volkswagen Golf
35 people viewed this question
Usually answered in minutes!