Question about 2004 Pontiac Grand Prix
Take the oil cap off and pull up and back towards you ,you have to take the oil cap extension off too... just screws out of the valve cover like the cap.
Posted on Dec 23, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello! This indicates a fault with the wheel speed sensor/ABS sensor. Any major auto parts retailer can pull the details of this code (which sensor) for free, which will help you identify if the wiring is loose or damaged or if the sensor will need to be replaced. If you need to replace the sensor - you will need to replace the entire wheel bearing assembly, as the sensor is internal.
Thanks for using FixYa!
Posted on Nov 02, 2009
The mass air flow sensor is a round sensor that is mounted in the air intake, between the air cleaner box and the engine throttle body.
Posted on Feb 07, 2010
The thermostat housing is located in the upper radiator hose. You will see a metal elbow secured by two bolts into what I remember is the upper intake manifold...don't quote me on that but you will see it regardless of whatever I call it. Anyways, GM decided it was a good idea to put stainless steel bolts in there but that makes it easy to strip the threads in the bolt hole so I think it's best when you put your wrench on the bolt to just tap on the handle till you vibrate it loose, then turn it.
When you pull off the housing you'll lose a little coolant and it will create an air pocket which we'll address. It's a 50/50 chance that the thermostat housing gasket will either stick to the housing or the engine...it may be torn, cracked or flaking in either case clean both contact surfaces before you replace the gasket. I recommend an oil impregnated poly material gasket.
Note the position of the thermostat in the hole and place the new one in as such.
I recommend a 180 degree thermostat...stock is 195 but the GTP runs better with the 180.
Put on gasket and reinstall the hose/housing assembly, alternate from one bolt to the other so the housing mates flat and cannot cause a leak.
Next, fill the coolant overflow bottle to the "HOT" mark. If the bottle is dirty and hard to see just put a light on top of the bottle...GM didn't mark it very well so if it's not squeaky clean you can hardly see a damn thing.
*IMPORTANT** if your car still has Dexcool in it, DUMP IT. It will eventually destroy the motor.
If not...continue on. Start the car. Go back to the thermostat housing and place a rag on top of, and twist the peacock valve on top of it to let the air out until it starts to get coolant on the rag. Done.
Posted on Feb 27, 2010
Tips for a great answer:
Sep 15, 2011 | 2004 Pontiac Grand Prix
May 27, 2011 | 2004 Pontiac Grand Prix
Jul 02, 2010 | 2004 Pontiac Grand Prix
Jul 06, 2010 | 2004 Pontiac Grand Am
Mar 10, 2010 | 2004 Pontiac Grand Prix
Feb 07, 2010 | 2000 Pontiac Grand Prix
Jan 23, 2010 | 2005 Pontiac Grand Prix
Sep 15, 2008 | 2004 Pontiac Grand Prix
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: