Question about Cars & Trucks

1 Answer

How do I replace the missing power steering pump pulley, 2001 GM 4.3 L engine?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,309 Answers

Why is it missing? Could get one from salvage yard if you have the tool to remove it.

Posted on Dec 15, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Video of replacing power steering pump 2000 Pontiac montanspa


Pontiac Grand Am/ Olds Alero 3.4 liter powersteering pump ...

? 16:26
https://www.youtube.com/watch?v=fhOaJUAgPTA
Jan 6, 2014 - Uploaded by JoeTheAutoGuy
this is a video on how to replace a power-steering pump on the Gm 3.4 ... My 2000 Olds Alero (2.4) power steering pump itself is fine, but the ...

How to Replace Power Steering Pump GM 3800 - YouTube

? 19:45
https://www.youtube.com/watch?v=-T8Kek90qAA
Sep 28, 2014 - Uploaded by Rich Rodgers
How to replace the power steering put on General Motor 3800 Engine. ... Sign in to add this video to a playlist. ... Power Steering Pump Pulley Removal and Installation ACDelco - Duration: 6:25. by MyPartsGarage 136,263 views ... How to replace a power steering rack and pinion on a 2005 Pontiac Grand ...

How to Install the Power Steering Pump - AutoZone Car ...

? 6:27
https://www.youtube.com/watch?v=PMX-dBhgwlo
Apr 19, 2012 - Uploaded by AutoZone
How to Install the Power Steering Pump - AutoZone Car Care ...Power Steering Pump Replacement 2000-2006 Chevrolet Tahoe, Suburban, ...

How to replace your power steering pump - YouTube






Dec 28, 2015 | Pontiac Cars & Trucks

2 Answers

How to remove and install the power steering pump?


Power steering pumps require one special tool. for you ,you ll need the GM pulley puller $29 at northern or autozone. you cant get the pump out of the bracket without removing the pulley. after you have the right tools its gravy . loosen the belt remove the pulley ,pump. install the new pump ,use the tool to press the pulley back on and reinstall the belt. Now you have to bleed the air out and that can be messy. leave the filler lid off after putting in new fluid and turn the wheel from lock to lock several times. if you didnt let any air in the lines during your repair you should be good to go. Its not as simple as it sounds. Be ready for some cussing . pressure wash your engine and put a large drip pan under the car before you start and at least youve saved some grief . have some fun, if you screw up the worst thing is you tow your car to the shop. If you get it right thats what its all about.

Mar 03, 2011 | 2001 Chevrolet Malibu

1 Answer

I WILL LIKE TO KNOW HOW CAN I REPLACE THE POWER STEERING PUMP ON A 2001 CHEVY MALIBU


1. Remove serpentine belt

2. loosen power steering pressure and return hoses

3. Remove nut from pressure line mounting on alternator bracket

4. remove power steering pump mounting bolts.

5. Lift pump assembly from engine mounting and remove hoses.

6. Reverse order to install. Fill and bleed system.

NOTE: A new or rebuilt power steering pump will most likely not come with a pulley attached. You will need a power steering pulley remover/installer tool to transfer the pully from the old pump to the new one.

Feb 19, 2011 | Chevrolet Malibu Cars & Trucks

1 Answer

I have a 1995 lexus Ls400.is there a way to tighten the power steering pulley without removing it.


  • xus LS 400 and locate the power steering pump pulley, fluid reservoir and pump on the upper front driver side of the engine.
  • 2 Connect the pulley remove tool to the front of the power steering pulley. Brace the arms on the pulley tool on the **** of the pulley. Connect the metal key in the middle of the pulley tool to the nut in the middle of the pulley. Connect the power drill to the pulley tool and pull the trigger to remove the pulley securing nut. Remove the drive belt and the pulley.
  • 3 Position the drain container under the power steering pump. Remove the drain plug from the bottom of the pump using the metric ratchet set. Let the fluid drain from the pump into the drain container. Replace the drain plug to the bottom of the power steering pump.
  • 4 Remove the securing bolts from the right and left side of the reservoir and the pump using the metric ratchet set. Pull the pump upward and disconnect the hose from the bottom of the pump using the wrench. Pull the pump from the engine compartment.
  • 5 Lower the new power steering pump into the engine compartment. Reconnect the hose to the bottom of the power steering pump. Position the new power steering pump onto the engine. Replace the securing bolts the right and left side of the pump and reservoir. Tighten the bolts using the metric ratchet set.
  • 6 Replace the power steering pump pulley the opposite way that you removed it. Reconnect the drive belt.
  • Fill the power steering pump reservoir with fresh power steering fluid. Start the engine and rotate the steering wheel to circulate the new power steering fluid. I no i gave you directions on how to remove the whole power steering pump question is the pully loose or are you wanting to just change a belt good luck happy holidays


  • Dec 15, 2010 | Lexus LS 400 Cars & Trucks

    1 Answer

    How to replace the power steering pump on a 2001 Pontiac Aztec


    Welcome to Fixya

    here's the procedure on how to replace water pump of your car

  • 1 Turn the belt tensioner pulley counterclockwise on the 3.4L modeal. Use a breaker bar and a socket to rotate the center bolt on the tensioner pulley. If you have a 3.5L engine model, turn the pulley clockwise.

  • 2 Slide the drive belt off the steering pump pulley.
  • 3 Detach the black ground cable from the battery using a wrench.
  • 4 Position a drain pan under the car in the direction of the steering pump hoses.
  • 5 Move any wire brackets near the steering pump out of the way using a wrench or ratchet and socket, if necessary.
  • 6 Disconnect the return hose from the power steering pump by loosening the clamp at the steering pump using a ratchet and socket. Then pull the hose off the pump and let the steering fluid drain into the pan.
  • 7 Detach the pressure hose from the steering pump by unscrewing the retaining nut at the pump using a tube wrench. Let the steering fluid drain on the pan.
  • 8 Unscrew the steering-pump mounting bolts using a ratchet, ratchet extension and socket.
  • 9 Lift the power steering pump off the engine compartment.
  • Install the New Steering Pump
  • 1 Position the new steering pump in place and start the mounting bolts by hand. Then tighten the bolts using the ratchet, ratchet extension and socket.
  • 2 Attach the pressure hose to the steering pump by starting the retaining nut by hand. Then tighten the nut using the tube wrench.
  • 3 Connect the return hose to the steering pump. Then tighten the clamp using the ratchet and socket.
  • 4 Reinstall any wire brackets you had to remove using a wrench or ratchet and socket.
  • 5 Connect the black ground cable to the battery using a wrench.
  • 6 Install the drive belt by turning the tensioner pulley counterclockwise using the breaker bar and socket. Then slide the belt over the steering pump pulley. If you have the Aztek 3.5L engine, turn the tensioner pulley clockwise.
  • 7 Reinstall any wire brackets you had to remove form near the steering pump using the wrench or ratchet and socket.
  • 8 Connect the black, ground cable to the battery using a wrench.
  • Bleed the Power Steering System
  • 1 Refill the steering fluid reservoir with new steering fluid. Make sure the level reaches the Full Cold mark on the reservoir.
  • 2 Raise the front of the vehicle using a floor jack until the front tires are off the ground. Then support the car on 2 jack stands.
  • 3 Turn the ignition key to the On position but do not start the engine.
  • 4 Turn the steering wheel fully from left to right 15 times.
  • 5 Check the fluid level in the steering reservoir and add if necessary.
  • 6 Lower the vehicle and start the engine. Turn the steering wheel and listen for steering noises. If you hear noises while turning the steering wheel, repeat steps 2 through 5 of the bleeding procedure to get rid of the air in the steering system. Turn off the engine.

  • Thank you for using Fixya!

    Dec 06, 2010 | 2001 Pontiac Aztek

    1 Answer

    Removing power steering pump from v8 windsor


    Section 11-02A: Steering Pump, Power, C-II 1996 Aerostar, Ranger and Explorer Vehicles Workshop Manual REMOVAL AND INSTALLATION Pump and Pulley SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Steering Pump Pulley Remover T69L-10300-B Steering Pump Pulley Replacer T65P-3A733-C
    Removal
    1. Disconnect the power steering return hose (3A713) at the pump and drain fluid.
    1. Remove the power steering pressure hose (3A719) by unscrewing connector from the pump.
    1. On the Aerostar 3.0L V-6 engine (6007), loosen the drive belt tensioner (6B209) and adjustment bolts.





      Item Part Number Description 1 10346 Generator 2 8501 Water Pump 3 8678 Belt Idler Pulley 4 3A733 Power Steering Pump Pulley 5 6303 Crankshaft 6 2884 A/C Clutch 7 — Without A/C On the 2.3L I-4 and 4.0L V-6 engines, slacken belt tension by lifting drive belt tensioner in a counterclockwise direction. On Ranger 3.0L V-6 engines, slacken belt tension by lifting drive belt tensioner in a clockwise direction. Remove drive belt (8620) from under drive belt tensioner and slowly lower pulley to stop. Remove the drive belt from the power steering pump pulley (3A733).





      Item Part Number Description 1 10346 Generator 2 2884 A/C Clutch 3 3A733 Power Steering Pump Pulley 4 8501 Water Pump 5 6303 Crankshaft 6 8678 Belt Idler Pulley 7 6B209 Drive Belt Tensioner
    1. NOTE: If the drive belt requires servicing, refer to Section 03-05 .

      Remove the drive belt from the power steering pump pulley.
    1. Remove the oil dipstick tube.
    1. Remove the power steering pump support (3C511).
    1. Install Steering Pump Pulley Remover T69L-10300-B on the pulley.
    1. NOTE: Do not apply pressure on the power steering pump rotor shaft (3B559). Pressure will damage internal thrust areas of the power steering pump (3A674).

      While holding the remover tool nut stationary with a wrench, rotate the inner spindle of the remover tool clockwise until the pulley is pulled off the power steering pump rotor shaft.
    1. Remove the bolts attaching the power steering pump to the A/C compressor mounting bracket (2882).
    Installation
    1. Install the power steering pump on the A/C compressor mounting bracket. Install and tighten attaching bolts to 41-61 Nm (30-45 lb-ft). On 4.0L engine, tighten to 47-64 Nm (35-47 lb-ft).
    1. Position the support on the A/C compressor mounting bracket. Install mounting bolts and tighten to 47-64 Nm (35-47 lb-ft).
    1. NOTE: Fore/aft location of power steering pump pulley on power steering pump rotor shaft is critical. Incorrect belt alignment may cause drive belt squeal or chirp. Make sure pull-off groove on power steering pump pulley is facing front and flush with end of shaft ± 0.254mm (± 0.010 inch).

      Install the Steering Pump Pulley Replacer T65P-3A733-C and install the power steering pump pulley.
    1. Install the drive belt on the power steering pump pulley.
    1. On the 2.3L I-4, Ranger 3.0L V-6, and 4.0L V-6 engines, position and rotate drive belt on engine. While lifting drive belt tensioner in a counterclockwise direction (clockwise on Ranger 3.0L V-6), slide drive belt under drive belt tensioner and lower drive belt tensioner to drive belt.
      On Aerostar 3.0L V-6 engine, position the belt idler pulley (8678) assembly to give the drive belt the tension specified. Refer to belt tension check in Section 03-05 . Tighten the drive belt tensioner and adjustment bolts to 47-64 Nm (35-47 lb-ft).
    1. Install the power steering pump support, if removed.
    1. Install the oil dipstick tube.
    1. Install the pressure hose tube nut and new Teflon® wagner into power steering pump valve outlet fitting (3D654) and tighten to 41-54 Nm (30-40 lb-ft).
    1. Connect the power steering return hose to the power steering pump, and reposition the clamp.
    1. Fill the power steering oil reservoir (3A697) with Premium Power Steering Fluid E6AZ-19582-AA or equivalent fluid meeting specification ESW-M2C33-F. Start the engine and turn the steering wheel (3600) from left to right without hitting stops to remove air from the system.
    1. Check for leaks and recheck the fluid level. Add fluid if necessary to proper level as specified in Section 11-00 .


      Power Steering Pump and Power Steering Pulley, 2.3L TPH Engine, Ranger Only





      Item Part Number Description 1 2882 A/C Compressor Mounting Bracket 2 N606543-S2 Bolt (2 Req'd) 3 N606069-S2 Bolt (2 Req'd) 4 N605803-S2 Bolt 5 N800199-S8M Screw 6 3D673 Power Steering Pump Pulley 7 3F671 Power Steering Belt Idler Support 8 N806020-S2 Bolt 9 3A674 Power Steering Pump 10 19703 A/C Compressor A — Tighten to 21.2-29 Nm (16-21 Lb-Ft) B — Tighten to 40.3-55 Nm (30-41 Lb-Ft) C — Tighten to 44-51 Nm
      (32-38 Lb-Ft)

      Power Steering Pump and Power Steering Pulley, 3.0L Engine, Aerostar





      Item Part Number Description 1 3A674 Power Steering Pump 2 3C511 Power Steering Pump Support 3 6007 Engine 4 N803564 Stud 5 N802827-S2 Nut 6 N800199-S8M Screw (3 Req'd) 7 N8011179-S2 Screw (3 Req'd) 8

    Jun 09, 2010 | 1996 Ford Explorer

    2 Answers

    Looking to see haw difficult it is to change power steering pump.? any ideas Iam some what mechanicaly inclined


    GM Astro/Safari 1985-1996 Repair Guide
    Power Steering Pump - REMOVAL & INSTALLATION
    (see Figures 1, 2, 3, 4, 5, 6 and 7)

    199f8a3.jpg

    Fig. 1: Exploded view of the power steering pump assembly mounting-2.5L engine

    1544b7a.jpg

    Fig. 2: Exploded view of the power steering pump assembly mounting-early-model 4.3L engine

    8c93529.jpg

    Fig. 3: Removing the power steering pump pulley-1985-92 vehicles

    1995aea.jpg

    Fig. 4: Installing the power steering pump pulley

    d000dbb.jpg

    Fig. 5: Pump pulley removal and installation-1993-96 vehicles

    e8e94e6.jpg

    Fig. 6: Exploded view of the power steering pump mounting-late-model 4.3L engines (1993-96 shown)

    44caf14.jpg

    Fig. 7: Typical power steering pump hose routing-1996 shown


    The following procedure requires the use of the GM Puller tool No. J-29785-A (1985-92), Puller J-25034-B (1993-96) or equivalent, and the GM Pulley Installer tool No. J-25033-B or equivalent.
    1. Disconnect the negative battery cable for safety.
    2. For 1996 vehicles, remove the air cleaner assembly for access.
    3. For 1993-96 vehicles, remove the hood latch and the upper fan shroud.
    4. Release tension and remove the drive belt.
    5. Remove the power steering pump pulley using a suitable puller tool.
    6. Remove the power steering pump retaining bolts, then reposition the pump as necessary for access to the hoses.
    7. Position a fluid catch pan under the power steering pump.
    8. Remove the hoses from the power steering pump and drain the excess fluid into the catch pan.
    WARNING Be sure to cap all openings in the pump hydraulic system to prevent excessive fluid spillage and the possibility of system contamination.
    1. Remove the power steering pump from the vehicle.
    To install:
    1. Position the pump to the vehicle, then uncap and connect the pump hoses.
    2. Install the steering pump to the retaining bracket, then secure using the retaining bolts. Tighten the power steering pump-to-bracket bolts to 37 ft. lbs. (50 Nm). For 1996 vehicles, tighten the nut to 30 ft. lbs. (41 Nm).
    On early-model vehicles where the drive belt is tensioned by pivoting the power steering pump assembly, do NOT fully tighten the mounting bolts at this time, since you will just have to loosen them again for belt installation and adjustment.
    1. Install the pump pulley using the GM Pulley Installer tool No. J-25033-B or equivalent. Press the drive pulley onto the power steering pump.
    2. Hand-tighten the pivot bolt, the adjusting bolt and the washer.
    3. Install the drive belt. On early-model vehicles so equipped, properly adjust the belt tension. For details on belt installation and tension adjustment.
    4. For 1993-96 vehicles install the upper fan shroud and the hood latch assembly.
    5. For 1996 vehicles, install the air cleaner assembly.
    6. Connect the negative battery cable.
    7. Refill the power steering reservoir and bleed the power steering system.
    8. Remove the jackstands and carefully lower the vehicle.
    9. Road test the vehicle, then check and top-off the power steering fluid.

    hope this help (remember rated this post) Good luck.

    May 13, 2010 | 1989 GMC Safari

    1 Answer

    Replace power steering pump


    NOTE: The following procedure requires the use of the GM Puller tool No. J–29785–A (1985–92), Puller J–25034–B (1993–96) or equivalent, and the GM Pulley Installer tool No. J–25033–B or equivalent.
    1. Disconnect the negative battery cable for safety.
    2. For 1996 vehicles, remove the air cleaner assembly for access.
    3. For 1993–96 vehicles, remove the hood latch and the upper fan shroud.
    4. Release tension and remove the drive belt. For details, please refer to Section 1 of this manual.
    5. Remove the power steering pump pulley using a suitable puller tool.
    6. Remove the power steering pump retaining bolts, then reposition the pump as necessary for access to the hoses.
    7. Position a fluid catch pan under the power steering pump.
    8. Remove the hoses from the power steering pump and drain the excess fluid into the catch pan.
    9. WARNING
      Be sure to cap all openings in the pump hydraulic system to prevent excessive fluid spillage and the possibility of system contamination.
    10. Remove the power steering pump from the vehicle. To install:
    11. Position the pump to the vehicle, then uncap and connect the pump hoses.
    12. Install the steering pump to the retaining bracket, then secure using the retaining bolts. Tighten the power steering pump-to-bracket bolts to 37 ft. lbs. (50 Nm). For 1996 vehicles, tighten the nut to 30 ft. lbs. (41 Nm). NOTE: On early-model vehicles where the drive belt is tensioned by pivoting the power steering pump assembly, do NOT fully tighten the mounting bolts at this time, since you will just have to loosen them again for belt installation and adjustment.
    13. Install the pump pulley using the GM Pulley Installer tool No. J–25033–B or equivalent. Press the drive pulley onto the power steering pump.
    14. Hand-tighten the pivot bolt, the adjusting bolt and the washer.
    15. Install the drive belt. On early-model vehicles so equipped, properly adjust the belt tension. For details on belt installation and tension adjustment, please refer to Section 1 of this manual.
    16. For 1993–96 vehicles install the upper fan shroud and the hood latch assembly.
    17. For 1996 vehicles, install the air cleaner assembly.
    18. Connect the negative battery cable.
    19. Refill the power steering reservoir and bleed the power steering system.
    20. Remove the jackstands and carefully lower the vehicle.
    21. Road test the vehicle, then check and top-off the power steering fluid.
    Fig. 3: Removing the power steering pump pulley — 1985–92 vehicles

    213c6a5.jpg
    Email me at greg.bernett@mcchord.af.mil for an engine picture breakdown.

      Jul 22, 2009 | 1990 GMC Safari

      2 Answers

      How do I repair a leaking power steering hose?


      ok thees instructions that i have is for replacing the power steering pump but it has a great pic witch shows the power steering hoses i hope it helps


      NOTE The following procedure requires the use of the GM Puller toolNo. J-25034-B or equivalent, and the GM Pulley Installer tool No.J-25033-B or equivalent.
      1. Disconnect the negative battery cable for safety.
      2. Remove the air cleaner assembly for access.
      3. Release tension and remove the drive belt.
      4. Remove the power steering pump pulley using a suitable puller tool.
      5. Remove the power steering pump retaining bolts, then reposition the pump as necessary for access to the hoses.
      6. Position a fluid catch pan under the power steering pump.
      7. Remove the hoses from the power steering pump and drain the excess fluid into the catch pan.
        WARNING Be sure to cap all openings in the pump hydraulic system toprevent excessive fluid spillage and the possibility of systemcontamination.
      8. Remove the power steering pump from the vehicle.

        0900c15280227d22.jpg enlarge_icon.gifenlarge_tooltip.gifFig. Pump pulley removal and installation


        0900c15280227d23.jpg enlarge_icon.gifenlarge_tooltip.gifFig. Exploded view of the power steering pump mounting


        0900c15280227d24.jpg enlarge_icon.gifenlarge_tooltip.gifFig. Typical power steering pump hose routing

      To install:
      1. Position the pump to the vehicle, then uncap and connect the pump hoses.
      2. Install the steering pump to the retaining bracket, then secureusing the retaining bolts. Tighten the nut to 30 ft. lbs. (41 Nm).
      3. Install the pump pulley using the GM Pulley Installer tool No.J-25033-B or equivalent. Press the drive pulley onto the power steeringpump.
      4. Hand-tighten the pivot bolt, the adjusting bolt and the washer.
      5. Install the drive belt.
      6. Install the air cleaner assembly.
      7. Connect the negative battery cable.
      8. Refill the power steering reservoir and bleed the power steering system.
      9. Road test the vehicle, then check and top-off the power steering fluid.

      Apr 23, 2009 | 2001 GMC Safari

      Not finding what you are looking for?
      Cars & Trucks Logo

      Related Topics:

      13 people viewed this question

      Ask a Question

      Usually answered in minutes!

      Top Cars & Trucks Experts

      yadayada
      yadayada

      Level 3 Expert

      75117 Answers

      Colin Stickland
      Colin Stickland

      Level 3 Expert

      22095 Answers

      Randy Ohler

      Level 3 Expert

      14585 Answers

      Are you a Car and Truck Expert? Answer questions, earn points and help others

      Answer questions

      Manuals & User Guides

      Loading...