Question about 2009 Chrysler Sebring

1 Answer

How do I fix grinding whinding noise on 2009 Chrysler Sebring

Replaced sephertin belt and tension pulley n alternator

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

Hi, That sound maybe coming from the power steering pump. Check oil level and check belt tension. It maybe time for a new belt.
If noise presists see you local mechanic for further help. Good luck.

Posted on Dec 15, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Getting aluminum metal shaving s on fan belt drive


REMOVE THE BELT AND TURN EACH COMPONENT BY HAND CHECKING FOR WOBBLE AND BINDING. DID YOU REPLACE THE TENSIONER ASSY OR JUST THE PULLEY?

Dec 15, 2014 | 2009 Chrysler Sebring

1 Answer

Tensioner location on 97 chrysler sebring 2.5L 6 cyl


The tensioner pulley looks like an idler pulley, only with an adjusting bolt protruding out about 2 inches from just behind the pulley. Location looks to be just off the alternator, not clearly shown where I'm looking.
To loosen belt, you loosen the tensioner pulley nut, and then turn the adjusting bolt in to relieve tension. When putting the belt back on, adjust tension with adjustment bolt, then tighten the pulley nut. This is for Sebring Coupe, Convertible is different. Good luck.

Jun 22, 2012 | Chrysler Sebring Cars & Trucks

1 Answer

Need belt routing diagram for 2001 chrysler sebring lxi


Thanks for using FixYa.




jturcotte_2444.gif

Fig. Accessory drive belt routing-2.7L engine
Chrysler Cirrus & Sebring Convertible; Dodge Stratus; Plymouth Breeze



jturcotte_2445.gif

Fig. Accessory drive belt routing-Chrysler 2.7L engine





2.7L Engine
A/C & Alternator Belt

  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Loosen tensioner locking bolt and pivot bolt.
  4. Rotate tensioner clockwise to allow enough slack to remove belt

To install:
  1. Install the air conditioning compressor/alternator belt on pulleys, tensioner in slack position, slip belt over idler last.
  2. Adjust drive belt tension.
  3. Install the belt splash shield and right front wheel.
  4. Lower vehicle.
    jturcotte_2446.gif

    Fig. Installing A/C & alternator belt-2.7L engine


  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Raise and safely support the vehicle.
  3. Remove the right front wheel and belt splash shield.
  4. Loosen the tensioner locking bolt and pivot bolt.
  5. Rotate tensioner clockwise to allow enough slack to remove the belt

To install:
  1. With the tensioner in a slack position, install the Air Conditioning (A/C) compressor/alternator belt on the pulleys. Slip the belt over the idler last.
  2. Adjust the drive belt tension.
  3. Install the belt splash shield and right front wheel. Tighten the wheel lug nuts to 100 ft. lbs. (136 Nm).
  4. Lower the vehicle.

Power Steering Belt
  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Remove the air conditioning compressor/alternator belt.
  4. Loosen belt adjusting bolt. It is not necessary to loosen the pivot bolt on the power steering pump. There is a bushing incorporated into the power steering pump/bracket that allows it to pivot.
  5. Remove the power steering belt.

To install:
  1. Install the power steering belt on pulleys.
  2. Adjust drive belt tension.
  3. Install the air conditioning compressor/alternator belt.
  4. Install the belt splash shield and right front wheel.
  5. Lower vehicle.


Oct 27, 2011 | Cars & Trucks

1 Answer

My 2000 Ford focus was making a grinding noise when driving the power stering went out and I look under the hood and the belt was loose what do I do... O battery light is now on.


sounds like your belt broke. replace with a new belt. battery light is on because the belt is not spinning the alternator. If it busted you should be able to pull it right out. Make sure to check the tensioner pulley, alternator pulley, power steering pump pulley and ac compressor pulley for free play(if you can make it spin with your hand it's good) and make sure that they're not binding or making any grinding noises. If the belt has never been replaced, then most likely it gave out.

Sep 24, 2011 | 2000 Ford Focus

2 Answers

Rattle noise coming from belt


this could be a bad pulley or alternator, you will need to remove the belt and spin the pulleys by hand to see which one is making noise, it could also be the ac compressor pulley, start there.

Sep 04, 2010 | 2008 Chrysler Sebring

1 Answer

When i start the car it seems to run fine,however,when i give it gas in park, a squeeking noise starts and gets louder and louder.could this be a worn out belt or pullie or neither?any suggestions


could be alternator bearingf.. idler pulley,,, tensioner pulley,,,and so on.. find a long screw driver put metal tip on alternator housig near bearings with motor running,,,place ear on handle.. it now is a listening device,, do this for each component such as pulleys,,, the loudiest one should be culprit.. be very carfull not to get screw driver hung up in belt

Oct 10, 2009 | 2002 Chrysler Sebring

1 Answer

Belt came off 1998 chrysler sebring lxi


you have two belts . put the large belt on first . it goes around crank pulley air conditioning pulley alternator pulley.loosen tension pulley to adjust belt. tension. then you put the other belt on power steering pump pulley and crank pulley. adjust belt tension loosen power steering pivot bolt. that it.

Mar 16, 2009 | 1998 Chrysler Sebring

Not finding what you are looking for?
2009 Chrysler Sebring Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...