Question about GMC Cars & Trucks

Open Question

Need wire color in harness for 1995 Yukon GMC brake lights and blinkers?

How to wire brake light brake blinker harness wires to fuse box?

Posted by on

  • Antonio Delgado
    Antonio Delgado Jan 11, 2015

    Hi Dee Lewis, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? From the turn signals on down. Are you wiring new trailer lights. Or you seeking just power and sending to lights ??

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Mikey108
  • 475 Answers

SOURCE: 1989 Jeep Cherokee - Electrical Problem - horn, brake lights, blinkers, radio/cd...

There could be a fusible link under the hood off the starter relay that is burnt out.

Posted on Oct 13, 2008

Ad
  • 2 Answers

SOURCE: no brake lights

Not a problem. Click on the link below and I believe this will solve your problem. I have just recently had the same problem and have fixed it on my car. The part cost $60.99 at advanced auto. The link has awesome pictures, steps, and the solution to your problem. Please let me know if this helps.

http://tss.likeabigdog.com/

Jason

Posted on Mar 18, 2009

  • 3 Answers

SOURCE: need help with the wiring diagram for my 92 Dakota, has not brake lights or blinkers

www.wiring-diagram.com
You can get any wiring diagram for any vehicle. It will cost about $12 and it's well worth it. It will give you the complete diagram bumper to bumper.

Posted on Apr 29, 2009

  • 10 Answers

SOURCE: fuse diagram on chevy s10 pickup extended cab.

behind the radio, take the radio and the cover that goes over it. it should be there next to the hazard ligths flasher.

Posted on May 28, 2009

  • 100 Answers

SOURCE: 1997 GMC Sierra p/u. Brake light & blinker out. Lamp & fuse ok.

you probably got the wrong bulb
those are usualy a different number higher wattage, they look exactly like an 1127 but are a 2027 or even a 3027 check the bulb base it has the number printed on it

Posted on Aug 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The left tail light on my trailer doesnt work.the stop and turn signal works . is there a fuse for it? i have 2011 gmc sierra 1500


There is a tail lights fuse for the truck, but not for the trailer.
First, check that your left tail light on the truck is working, if not fix the problem (new bulb, bad contact, fuse).
Then the obvious suggestions regarding the trailer are: Check the tail light portion of the bulb to be sure it is not blown. If good (best to put in new one to be sure), then check the wiring from the front of the trailer all of the way to the non working bulb, including every connection and at any place it is secured to the trailer frame. If all is good with the trailer circuit and bulb, then check the truck's trailer connector, including any adapters. If by chance the truck is wired with a flat 4 wire harness the problem may be solved (but usually the blinkers are the problem). Modern trucks require a 5 wire harness which self adapts to the standard 4 wire trailer circuit. Check for dc power (12 volts) from the truck's female connector. One wire will be ground, others will be taillights (turn on headlights), brake lights (have someone press brake pedal), and blinkers (turn on switch and blinkers).

Oct 09, 2016 | 2011 GMC Sierra 1500

1 Answer

2006 malibu no brake/blinker lights


With that loose wire with tape on it it sounds like an add-on alarm may have been installed at one time, which would tie into the brake lights to make them flash when alarm goes off. Maybe those places that install these alarms may be able to figure the wiring out and put it back to 'normal'.

Oct 07, 2017 | 2006 Chevrolet Malibu LT

1 Answer

HELP!! 1996 GMC Sierra Has no brake lights or Hazards but blinkers and running lights work


beleive there is a junction box on those models that main tail lights harness comes too then is distributed out in seperate smaller harnesses.

Apr 28, 2013 | 2000 GMC Sierra

1 Answer

94 gmc pick up pops brake fuse right away changed brake light switch and blinkers and tail lights still work y no 4ways or brake lights??


Check your brake light switch located under the dash on the top of your brake pedal,also it could be a broken tail or brake lite bulb.

Jan 22, 2011 | 1995 GMC Yukon

1 Answer

Drivers side tail light lighting up at night when head lights are on but break light not working on that side. passenger side not lighting up when head lights are on but break light working on that side....


You probably already know this, however the GMC 2002 Yukon Denali uses the Wagner 3157 (or equivalent) dual element bulb. The running light uses one element whereas the brake & blinker share the other element that burns brighter.

Check to ensure the correct bulbs are being used. Then check all wire harness connections. Since the blinkers function, then it sounds like the connections are good.

It really sounds like there is a bulb issue, so check that first, then let us know the results.

Mar 11, 2010 | 2002 GMC Yukon Denali

2 Answers

1995 GMC Sierra 4x4 - Having tail light problems


Most likely it is a groung issue where your rear wiring harness grounds to the frame. There may also be additional grounds for the wiring harness along the frame before the ground by the rear bumper. One other option is to make sure you have the correct bulbs in. I have seen something pretty similar to that caused by improper bulbs. Make sure your bulbs for the brake light/turn signal have dual filaments as that could be an indication you have the wrong ones; if you have the bulbs I think you do.

Mar 12, 2009 | 1995 GMC Sierra

2 Answers

My chevy z71 96 running lights work, but not right brake/blinker


check for a short it could be anywhere in the line

Feb 14, 2009 | 1996 Chevrolet K1500

2 Answers

Pressing brake causing blinker issue


The trailer harness that was installed probably has a short inside the box that distributes power to the trailer pig-tail. Remove the trailer harness. You problem will be cured.

Jan 27, 2009 | 1999 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...