I tried to unscrew the handle, but it did not work. I also tried to pull it off, no results. help me
SOURCE: Releasing Parking Brake
adjust the park brake cable first (3 pedal clicks and brake should start to engage the rear wheels) then lube the park brake ratchet release parts (under the dash) with WD40, this should take care of the problem.
SOURCE: 2000 blazer parking release handle broken
You will have to look under the side panel, and you can release it with a screw driver, or get a pair of vise grips to pull the cable to release it.
SOURCE: emergency break cable broke on 2004 silverado
I had the same problem on my 2003. Open the driver door all the way. Get on your knees just outside the door. Follow the plastic tub that holds the parking brake release cable inside the truck. Start from the release lever and follow to the end of the tube. There will be a metal lever that the cable was attached to before it broke. You have to pull that lever with your hand to release the parking brake. Very Important!!!...Hold the parking brake activation pedal with your other hand when you release the brake. Let the pedal out slowly when you pull the metal release lever. The pedal will come back very fast and you could injure yourself if you are not careful. Good luck!
SOURCE: park brake light wont turn off
there is a switch at the top of the actual lever .This would be what I would look at.
SOURCE: Have an Chevy 2000 S10 with parking brake issues.
Get under the veh and check out ,the rusted parking brake cables
156 views
Usually answered in minutes!
×