Question about Cars & Trucks
You have problem with your oil switch, or oil pressure. if you unplug the switch an the light goes. try replace the switch first.
Posted on Dec 15, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
for the 220cdi,it is a 611.961 motor, you have to refill 6.5 liter,included the olilfilter.Whenyou have refill,and after the motor has running,you can check the oil-level in the board-computer.
Posted on Mar 28, 2009
With the key in position 1, hit the odometer reset button on the left on the cluster 3 times in a row. The cluster should beep once. scroll through the multifunction display with the page buttons until the display shows the onboard voltage screen. It will say something like "UB: 12.2 V" scroll threw this menu with with the up/down until you reach the "service menu" page. scroll down to "confirmation" press +, confirm full service with +. Wait till it says service confirmed. cycle the key off and then back on to position 2. Scroll to the normal service menu where it normally says how many days or miles till next service. If the service was reset correctly, it will say "service display not possible" for a few minutes while it recalculates. You must cycle the key off and back on before it will back out of the onboard diagnostic mode. If you dont back out, the esp/abs/bas lights will illuminate when the car is started
Posted on Apr 13, 2009
get under car.find oil pan,remove the plug].with something to catch the old oil[ let drain change oil filter.replace with new one.after all oil has drained.put plug back in and fill with oil per your manufactures guidelines
Posted on Jun 17, 2009
This can not be reset by conventional methods. This must be done through a scan tool. Usually only the dealer scan tool will communicate with the SRS module. If the SRS light is on you have other issues and they must be remedied before the light will go out. There is no way of knowing what the issue is without running codes with the scan tool.
Posted on Feb 10, 2010
Tips for a great answer:
Oct 21, 2013 | 2006 Mercedes-Benz Mercedes Benz CLS500
Dec 09, 2012 | 2004 Mercedes-Benz ML 350
Aug 03, 2011 | Mercedes-Benz ML500 Cars & Trucks
Jul 27, 2011 | 2006 Mercedes-Benz Mercedes Benz CLS500
Sep 08, 2010 | 2000 Mercedes-Benz C-Class
Jun 24, 2010 | 1996 Mercedes-Benz C-Class
May 26, 2010 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Sep 21, 2009 | 2005 Mercedes-Benz Cl-Class
Aug 13, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
24 people viewed this question
Usually answered in minutes!