Question about 2006 Chrysler Town and Country

1 Answer

Passenger light want come on when i first turn on the lights a2006 town and country van

Bought bulb for light ,i switched light bulbs the drivers light comes on but the passenger light stays off until i turn on the brits lights then both headlights come on

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 200 questions.

  • Chrysler Expert
  • 287 Answers

Low beam circuit is open some where,acquire a wire diagram to trace to the source,could be at the connector at the bulb easiest to check there first for ground and power to each of the wires with a test light with lights on dim then on high beam to determine which wire is low beam circuit,ground always is the black wire.

Posted on Dec 29, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Headlight wont work on passenger side of 2006 town and country

Try the working bulb on that side. Just because it is brand new doesn't mean it is good. If it still doesn't work push the wires on the back of the plug and see if it comes on if it does replace the head light plug. If not follow the wiring back and look for a break in the wire where it rubs against something

Apr 04, 2014 | 2006 Chrysler Town and Country

1 Answer

Brake lights on 1999 Chrysler town and country van does not work, any suggestions

Check fuses, wires and bulbs, finally check brake switch, generally is located backside brake peddal.

May 11, 2011 | 1999 Chrysler Town & Country

1 Answer

Hi and low beam lights dosnt working

the first thing to check is the bulbs, then all the fuses but these vans do have problems with the multi function switch, this is the switch you use to turn on the high beams and also the signals, i would start with the bulbs but i think its going to be the high beam switch, hope this helps.

Nov 17, 2010 | 2005 Chrysler Town & Country

1 Answer

2003 town and country driver side and passenger side power windows will not operate

either burnt fuse or a failed switch in one of the doors...use simple bulb tester and test circuit on ack of each switch to see if your getting current.

Jun 06, 2010 | 2003 Chrysler Town & Country

1 Answer

How do you change the brake lights?

you need to remove the case from the van. Pop the hatch and remove the screws on the inside of the light and the case will come out with a little wiggling. The bulbs will have a clip which you will need to remove. Then the light will also have a tab you need to push in and the bulb will turn out counterclockwise. install is the reverse of removal.

Apr 26, 2010 | 2005 Chrysler Town & Country

1 Answer

How to replace our low beam headlight on 1999 town and country

1.) Open the hood of your van 2.) On the passenger side of the vehicle, look behind the headlight enclosure. You will see a set of wires running into the back of it. This is the power clip. Either with your hand or a flat-head screwdriver, pop the power clip off.
3.) There is a plastic ring encasing the light bulb. Turn the ring counter-clockwise and pull it out of the socket and set it aside.
4.) Pull firmly on the light bulb to remove it.
5.) Place the new light bulb into the same opening. Be careful not to touch the glass part of the new bulb. The oils in your skin can substantially reduce the life of the new bulb.
6.) Replace the plastic ring and turn it clockwise to lock it in place.
7.) Reattach the power clip to the back of the bulb.

Oct 29, 2009 | 1999 Chrysler Town & Country

1 Answer

I need to change the bulbs in the overhead console of a Crysler town&country 2005 van? How do I get to them?

The plastic lense that you push to manually turn the light on and off pops off and the bulb is right there. I had the same problem and while I was having the oil changed I had the mechanic show me how to do it.

Oct 08, 2009 | 2005 Chrysler Town & Country

1 Answer

Tail light does not work

I hope you arent letting a simple thing like a burnt bulb ruin your day??Im not sure what you have checked so far but start with replacing the bulb,check the connector very good as this has been an issue on many makes and models

Jan 28, 2009 | 1996 Chrysler Town & Country

Not finding what you are looking for?
2006 Chrysler Town and Country Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides