Question about 2002 Pontiac Montana

2 Answers

I have a 2002 Pontiac Montana both low beams n both fog lights went out same time after hitting a bump, well my dad had van running and was pulling fuses on passenger side door and now it don't auto lock when driving and all my lights keep flashing. The door ajar, hatch ajar,change engine oil, low brake fluid. He said unplug battery for a few minutes plug back in to fix but it didn't. FYI headlights was blown bulbs. I wouldn't care but gas gauge messed up and I know I am low when it dings low fuel light while driving but it don't ding now just appears with the other flashing lights I mentioned above. Any ideas?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 56 Answers

This sounds like a body ground in issue concerning the headlights. Check the BCM fuse for the other problems. These sound like the body control module is malfunctioning.

Posted on Dec 17, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 47,788 Answers

Take your father down to the local pub and leave him there then take the car to an accredited auto electrician to have it fixed NO honestly this is the best idea as it will cost less eventually to have it fixed professionally

Posted on Dec 15, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: low beam headlights not working on 2004 Pontiac Montana extended

You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.

I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 pontiac montana has a headlight issue. Here's the details. Low beams are half voltage. 5.8v High beams are fine. 12.9v Fog lights work only on parking lights but are off on low beam. I think...


Sounds like some wires are damaged due too chafing or moisture. Trace the wires starting at the lights looking carefully for damage. Sometimes the spot that's chafed is difficult to find so look very closely at the wires.

Nov 23, 2014 | Cars & Trucks

1 Answer

2004 Pontiac Grand Am High Beams and Fog lights do not work


Check the relay that powers the high beam, if memory serves me the relay is shared between those two circuits.You can swap the relay with a known good relay to prove if that is the issue.

Sep 11, 2017 | Pontiac Grand Am Cars & Trucks

1 Answer

High Beams and Fog Lights on 2004 Pontiac Grand Am do not work


You can not have High Beams on and FOG LIGHTS at the same time. The Body Control Module controls this. You may have a bad Body control Module

Feb 12, 2014 | Cars & Trucks

1 Answer

2000 pontiac montana. I want to replace the driving ligh bulbs. the under the headlights what size is it?


Fog/Driving Light Bulb Size: 880
Here is the rest of the bulb size used in your Montana.
2000 Pontiac Montana Auto Light Bulb Diagram
Low Beam Headlight Bulb Size: 9004
High Beam Headlamp Light Bulb Size: 9004
Parking Light Bulb Size: 4157NALL
Front Turn Signal Light Bulb Size: 4157NALL
Rear Turn Signal Light Bulb Size: 3156
Tail Light Bulb Size: 3057
Stop Light Bulb Size: 3057
High Mount Stop Light Bulb Size: Assembly
Fog/Driving Light Bulb Size: 880
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 3156
Front Sidemarker Light Bulb Size: 194
Ash Tray Light Bulb Size: 558
Glove Box Light Bulb Size: 194
Map Light Bulb Size: 168
Dome Light Bulb Size: 562
Step/Courtesy Light Bulb Size: 168
Trunk/Cargo Area Light Bulb Size: 212-2
Daytime Running Light Bulb Size: 3157NALL
Thank you for using fixya.


Apr 30, 2010 | 2000 Pontiac Montana

1 Answer

Head lamp wont work


Try replacing bulbs they could have both gone at the same time,I think it takes a 9006 bulb. You could check by pluging low beam plug into high beam bulb if it works the low beam bulbs are gone

Feb 06, 2010 | 2001 Pontiac Montana

1 Answer

My low beams are out on my 03 Montana


I would check the hi-lo beam switch first.

Dec 14, 2009 | 2003 Pontiac Montana

1 Answer

How to change fog light bulb


Open the engine hood and you'll see there is a plastic housing holding the head light ans side light to the frame. There are two wing nuts and one wing bolt holding it all together. Remove those and pull the headlight and side light housings out from the frame. You'll be able to access all of the lights now.

Jun 10, 2009 | 2002 Pontiac Montana

2 Answers

I have a 2004 Envoy XL. The passenger side dim headlamp went out about 2 weeks ago and I replaced it. On Friday, I was leaving a meeting and I noticed my neither one of my headlamps were on, then I hit a...


This sounds like a loose connection/bad wire somewhere for the low beam lights. Can't really give you more information without seeing the vehicle, and wiring diagram for the circuit. Usually, things that go on and off when hitting bumps are connection/wiring problems. The fact that one of your low beam headlamps burnt supports this theory. Bad connections or wiring mean lower voltage, thus higher amperage at the bulb, motor or whatever it's running, which makes them burn a lot quicker.

Jan 13, 2009 | GMC Envoy XL Cars & Trucks

1 Answer

Low beam headlights not working on 2004 Pontiac Montana extended


You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.

I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp

Dec 26, 2008 | 2004 Pontiac Montana

Not finding what you are looking for?
2002 Pontiac Montana Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...