Question about 2004 Honda Civic

1 Answer

What is the torque for the cylinder head bolts on the 2004 Honda civic hybrid. I've looked all over the Internet and I can't find it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 45,552 Answers

You will not find torque settings for the cylinder head bolts. the setting to get the correct tension will start at 30ft/lb and then becomes an angle of turn of the head stud. So what you will be looking for will be something like start at 30ft/lb the turn 90 degrees then another 90 degrees and then 30 degrees .( these are not the figures just an example of what you will be reading as a head tension setting) you will need and angle gauge ( around $30.00 from a good auto parts store ) to do the job

Posted on Dec 15, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Replacing head gasket on 1995 honda civic, require torque specs and secquence

wow. a lot of bad information on this site. Refer to a manual for the proper torque sequence. The civic I believe is a two step torque procedure. First 22 ft lbs, than 53 ft lbs.

Posted on Jan 01, 2009

  • 20 Answers

SOURCE: 2004 chevy aveo cylinder head bolt torque how many

Step 1: 18 lb.-ft.
Step 2: additional 60 degrees.
Step 3: additional 60 degrees.
Step 4: additional 60 degrees.
Step 5: additional 10 degrees.

Each step involves starting at the center two bolts of the head and alternately tightening in a criss-cross pattern, ending with the bolts on the outer edge of the head.

Posted on Sep 14, 2009

inspectmycar
  • 233 Answers

SOURCE: 94 mazda B3000 3.0L cylinder head torque specs

Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below
aca9f77.gif

Posted on Sep 17, 2009

  • 1 Answer

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2

Posted on Jan 28, 2010

  • 12 Answers

SOURCE: head bolt torque specs for 200 honda accord 3.0

its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs

Posted on Apr 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I replace a rear hub assembly for a 2006 civic hybrid


Remove the wheel and the brake caliper/bracket assembly. Remove the center bolt from the hub assembly and pull the hub assembly off. Install in reverse order making sure the hub nut is torqued properly

May 09, 2015 | 2006 Honda Civic Hybrid

1 Answer

Torque spec on head for 1986 civic si 1.5liter


Help need torque spec for cylinder head bolts 1986 honda civic dx 1.5 pls...

Mar 10, 2012 | 1986 Honda Civic

1 Answer

99 Honda civic 1.6 engine torque specs and sequences for cylinder head


Tighten the cylinder head bolts to their final torque specification in two steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts.
  1. Step 1: Tighten each bolt to 22 ft. lbs. (30 Nm).
  2. Step 2: Tighten each bolt to 61 ft. lbs. (85 Nm).

zjlimited_1681.jpg

Fig. Cylinder head bolt loosening sequence - 1.6L (B16A2) engines (click image for zoom)

Hope helps.

Aug 05, 2011 | 1999 Honda Civic

1 Answer

Torque para cabeza honda civic motor 1.6


1996-97 Civic and Civic del Sol
1.6L (D16Y5, D16Y7 and D16Y8) ENGINES

Tighten the cylinder head bolts to their final torque specification in four steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows:
  1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
  2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
  3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
  4. Step 4: Retighten only the two center bolts to 49 ft. lbs. (67 Nm).

Hope helps (remember to rate and comment this).

Sep 23, 2010 | 1997 Honda Civic

1 Answer

2000 honda civic sir 1.6 dual cam vtec head torque and head bolt location


The Head bolts are located below the cams, so you have to take the cams out to get to the bolts.
The torque specs for the head bolts in sequence is 20, 40, then end at 63ft lbs. Be sure to apply anti sieze or dip the head bolts in oil, before you torque them down or you might pull out the threads. (Not a good thing TRUST ME!)
Hope this helps.

Aug 10, 2010 | 2000 Honda Civic

1 Answer

Hi what is the head torque on a 2002 honda civic


Dont forget to apply clean engine oil to the threads of each bolt for proper torquing. Then finger tighten. Then

    1. Tighten the cylinder head bolts to their final torque specification in 4 steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows: Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).
    1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
    2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
    3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
    4. Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).


  • Mar 25, 2010 | 2002 Honda Civic

    1 Answer

    Cylinder head R and R


    any competent repair shop or the dealer can give you this, make sure to use new bolts as these are most likley streach fasteners or tourqe to yeild and only work properly once -jeff

    Jul 14, 2008 | 2001 Honda Civic

    Not finding what you are looking for?
    2004 Honda Civic Logo

    180 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Kevin Daniels

    Level 3 Expert

    1455 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...