Question about 1997 Lincoln Town Car

1 Answer

Power door locks,trunk relaese and rke inop,

Have checked all fuses,changed both power door lock switches,trunk release button and even the drivers door module, act like no power to ddm. HELP what next, did notice that drivers door has new lower hindge if this is relevant??? would love to have power, ground and wiring schematic for drivers door module.. thanks for any help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 11,730 Answers

Check power and grounds at DDM , sometimes wires in the rubber boot from body to door like to break ! If you can't read this you can go www.bbbind.com/ for wiring and TSB"S . click on technical information ,then click on tsb's and wiring diagrams . enter your vehicle information ,system and subsystem ! power door locks,trunk relaese and rke inop, - 25321618-oz5nakkj12rji0tfllbtiy10-3-0.gif

Posted on Dec 14, 2014

  • 3 more comments 
  • Douglas Kohlhorst
    Douglas Kohlhorst Dec 14, 2014

    Jeff, any ideas where I can find a pin schematic for the drivers door module, no breaks in wires at drivers door harness ,have power to ddm and ran ground from battery to door assy. Still lost

  • Jeff Armer Dec 15, 2014

    I have the pin out for ddm connectors , I could email them .

  • Jeff Armer Dec 15, 2014

    Hope you can view these !





  • Douglas Kohlhorst
    Douglas Kohlhorst Dec 15, 2014

    after further checking ,no power at fuse 11 and 13. jumped power to fuse 11 listed as ddm,blew 10 amp alt fuse under hood. any ideas ??

  • Douglas Kohlhorst
    Douglas Kohlhorst Dec 15, 2014

    According to what I read 11 is for ddm, 13 is fir heated mirrors. no power on either side of these fuses.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the Ford 2010 Ford Explorer "Remote Keyless Entry (RKE) module" located


The RKE is controlled by the SJB - smart junction box ! Fords BCM - body control module .
Principles of Operation
Power Locks
The SJB controls the power lock/unlock feature of all of the vehicle doors, including the liftgate, to lock or unlock based on the input received from the door lock control switch, the keyless entry keypad or the remote keyless entry (RKE) transmitter. Power locking and unlocking of the doors function independently of the key position, vehicle speed or transmission position. The smart junction box (SJB) activates internal relays to supply the correct voltage and grounds for the door lock actuators.

Your best bet would be to take to ford dealer or some other qualified repair shop .
Remote Keyless Entry (RKE) Transmitter Lock/Unlock Control - Unlock
The RKE transmitter feature provides lock/unlock functions independently of key position, vehicle speed, or transmission position. The RKE transmitter feature provides a 2-step process for unlocking the doors. Upon receipt of the first request for unlocking the doors, the RKE control feature requests the SJB to unlock the driver door only. If another unlock request is received within 3 seconds of the first, the RKE transmitter feature requests the SJB to unlock all the doors. This feature can be changed to global unlock, so that all the doors unlock on the first press of the unlock button. To toggle between the 2-step unlock and the global unlock press the lock and the unlock button on the RKE transmitter at the same time and hold the buttons for 4 seconds. The turn signal lamps flash to confirm that the feature has been toggled.
Remote Keyless Entry (RKE) Transmitter Lock/Unlock Control - Lock
The RKE transmitter feature requests that all the doors be locked when the lock button is pressed. On any press of the lock button with all doors closed, the SJB provides 1 flash of the parking lamps. If any door is ajar, no flash occurs. As soon as the last door is closed, the SJB provides the flash of the parking lamps. If 2 presses of the lock button are received within 3 seconds, the horn chirps once, and the parking lamps flash twice to indicate that all the doors are closed and locked. If any door is ajar when the second lock request is received within 3 seconds of the first, the RKE transmitter feature requests the SJB chirp the horn twice without flashing the parking lamps to indicate it locked all the doors but 1 or more doors are ajar. When the key is in the ON or START position, the parking lamp flashes and horn chirp confirmations do not occur.

All locks not working ?????
  • The doors do not lock/unlock using the remote keyless entry (RKE) transmitter
  • RKE transmitter battery
  • RKE transmitter
  • RKE transmitter programming
  • Aftermarket system
  • SJB
  • Go To Pinpoint Test H .

Apr 16, 2017 | Ford Cars & Trucks

2 Answers

My trunk won't open. What's wrong


Hi Annette, Im AL the owner of Big As Auto Repair.

Annette, if you are already able to get inside the trunk, remove the lever that goes to the lock actuator because the actuator may be locked up. Then see if it will open. NOTE: If the lock solenoid is mounted to the latch this will not work. If that doesn't help, then see if you can remove the bolts that hold the latch to the trunk and open the trunk that way so you can see better what the problem could be. Keep me posted at my auto-repair-website here: http://www.bigasautorepair.com/

Feb 26, 2015 | 2000 Buick Regal

2 Answers

My Ford Focus car doesn't centrally lock anymore, I have to use the key. It's not the fob battery because I changed it.


Sure you did put in a new battery? sure you did insert it correct? not the other way around? sure you did use the correct battery? like CR23 or AAA?
Sure all contacts in the battery compartment and on the battery are clean and shiny?
just a few things you could check.

Feb 09, 2015 | Ford Focus Cars & Trucks

2 Answers

I changed my batteries in my keyless remote


  • Jeep 1990 and later Remote keyless entry programing
  • Put the key in the ignition with all doors and trunk closed
  • Open the driver's door on the automobile and leave the door open.
  • 4 Move the switch on the door to the lock position while the door is open.
  • 5 Switch the key in the ignition two clicks to the right to the "On" position. do not start
  • 6 Press the lock button on your keyless remote for your Jeep and hold the button for 5 seconds. Release the button and remove the key from the ignition to complete the programming.


  • Read more : http://www.ehow.com/how_5019251_program-keyless-entry-jeep.html

    Jan 20, 2015 | 2002 Jeep Liberty

    1 Answer

    2002 S500 auto door and trunk locks inop all fuses good


    Check manual for under hood fuse location. Also, check fuse specially for door/trunk. I would replace even if it looked good. If that doesn't work then I would check the ground wires on the drivers side door for clean wires and a good ground.

    Dec 03, 2014 | Cars & Trucks

    1 Answer

    Trunk release wnen key, remote and button are inoperative


    The fob is probably dead, needs a battery...if your doors dont lock with fob that would confirm this, and I believe there is also a fuse for the door button...will work when car on but not when off is a blown fuse I think.

    Feb 08, 2014 | 1997 Saab 900

    2 Answers

    2000 ford windstar power door locks do not work and have checked every fuse


    The actuactors for your locks have a little motor in them. In this motor there is a resistor that will give out over time. Usually the locks gradually stop working over time. You can remove the actuator and take it apart and fix by removing the resistor in the motor and putting a peice of copper in its place. Takes about 30 minutes per door if you know what you are doing. Do a google search for ford windstar door lock fix and you will find several blogs with detailed descriptions of the repair.

    Jul 02, 2009 | 2001 Ford Windstar

    1 Answer

    Power door locks going crazy


    One of your door lock inside switches are bad.Find the one that doesn't feel right when you push it in either lock or unlock.The internal spring is broke causing the lock relay to keep try to lock or unlock until it gets hot & protects.

    May 07, 2009 | 2001 Saturn SC

    Not finding what you are looking for?
    1997 Lincoln Town Car Logo

    133 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lincoln Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    fordexpert

    Level 3 Expert

    5520 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Are you a Lincoln Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...