Question about 2006 Chevrolet Cobalt

4 Answers

What size is the axel nut on a2006 chevy cobalt front

Posted by on

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 28 Answers

GM A Car service manual: 30mm nut/socket torqued at 155 ft/lbs.

Posted on Dec 15, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

31 or 32 metric deep socket. If you have the wheel off, you can check it with a calipers to be sure. Has to be a deep socket

Posted on Dec 15, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,250 Answers

30mm deep socket (For spindle nut)
Take your torque wrench and 30mm deep socket and torque the spindle nut to 155 lb ft.
See this very good Tutorial ...

Posted on Dec 14, 2014

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Chevrolet Expert
  • 495 Answers

Memory serves says 36mm.....not absolutely pos. though

Posted on Dec 14, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DIY cv axle 2008 chevy aveo


Jack the vehicle up at proper jack points and lower onto jack stand or stands.remove drivers side wheel. Use needle node pliers and a screwdriver to remove the cotter pin in the axel nut and determine the size of the axel nut. It will most likely be metric 28mm to 36mm. Use an impact to remove the axel nut. Now you will need to remove one or both of the ball joints. Start with the bottom one first and hold the axel in place and pull out on the hub. After you have the hub off of the axel note the splines and how the line up. Now turn the hub so that it is out of the way. You may be able to just yank the axel out of the transmission. If it didn't come out easily you will need a crow bar to gently pry the axel out of the case. Be careful not to put too much pressure on the transmission case. It's aluminum and it will crack and break if you beat on it. Just pry gently and with the transmission in neutral ( be sure to chalk the rear wheels so the car won't run you over) slowly rotate the axel and pry until it comes out. If that doesn't work you will need to rent a slide hammer. Thread it to the free end of the axel and forcefully slide the weight out to knock the axel about of the trans. Installation is reverse. DO NOT USE A HAMMER to force the axel back in you will mushroom the threads and never get the nut on.

Dec 06, 2013 | Chevrolet Cars & Trucks

1 Answer

What size of socket to remove nut on the front drive axel 2000 mazda mpv


Measure it with a metric ruler from one side of nut to the other. It will be in millimeters, anywhere from 27mm to 32mm, most likely.

Feb 25, 2013 | 2000 Mazda MPV

1 Answer

Size of nut on 2002 front wheel axel


need to now the vehicle 1st 2002 what?

Jun 09, 2012 | Cars & Trucks

1 Answer

Front axle nuts size for 2003 pontiac grand prix


2002 Grand Prix front axel nut holding on hub is a 33MM or 1 5/16 deep socket

Feb 08, 2012 | 2003 Pontiac Grand Prix

1 Answer

How do I remove the front left axle shaft on a chevy 2007


remove the axle nut first, always took the upper ball joint loose just take the nut off apply some upwards pressure and hit spindle with hammer and it will allow you to move the hub and all out enough to remove axle. the upper ball joint nut has to come off
and seperate the ball joint from the steering knuckle
then plenty of room. good-day ! then just slide axel out,or pry between axel and ****** to pop it loose, it has a locking clip on transmission side. when putting back in make sure axel is locked in ******. and do not forget to torque axel nut when done.

Aug 05, 2011 | 2000 Chevrolet Silverado

1 Answer

When you replace front wheel bearing on dodge ram 1500 4x4 is their a toqure spec for the axel nut


175 ft pounds for the axl nut it gona take alot to get it of.the nut size is 1 -11/16. air tools make it easy the hub to nuckle nuts are 14mm 12 point.

Dec 30, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
2006 Chevrolet Cobalt Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...