Question about Holden Cars & Trucks

1 Answer

Remove the engine cover on a 2008 holden captiva?

I am attempting to locate the oil filter for the captiva. I understand this is a cartridge type filter and believe it is under the engine cover. The engine cover is held on by four upside down bolts. Has anyone any idea how I remove this?

Posted by on

  • declan magee
    declan magee Jan 28, 2015

    Many thanks for the help.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Holden Expert
  • 91 Answers

Not sure if you have answer to your oil filter. Diesel looking from front of vehicle left corner rear of engine , cover removed. 27 mm socket required . care taken awkward to remove oil will spill grab it with a piece of rag moving it down and under filter as it is removed. advise to suck out oil from lower filter body before refitting filter or oil will rise as filter is fitted and will spill over . Please also be aware which groove you remove the old oil ring from so as to fit a new o ring into the correct groove.

Posted on Jan 24, 2015

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 540 Answers

SOURCE: 2008 Chevy Trailblazer Oil filter location

yes...

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi Could someone please tell me if there is a cabin air filter in a Holden Rodeo 2007 ) I read all the log book that but haven't found any info on a cabin air filter and where it would be located


they sell a cabin filter for the rodeo 2006 -2008

an ebay seller makes a cabin filter for the 2006 to 2008 holden rodeos
$50....... a cartridge form
needs a stanley knife to cut into the blower fan box casing to fit their filter
you have to remove the glove box to get to it

filter seller suggests you search for the rodeo fitment
"CABIN AIR FILTERS AUSTRALIA YouTube CHANNEL "

this link
https://www.youtube.com/watch?v=ZZbThQ-bWPw


26306917-mcp1e2w24s4gl2eplbhxvqhp-1-0.jpg

26306917-mcp1e2w24s4gl2eplbhxvqhp-1-1.jpg
different seller
26306917-mcp1e2w24s4gl2eplbhxvqhp-1-3.jpg

Oct 10, 2016 | Holden Cars & Trucks

1 Answer

I got 2013 Holden captiva Diesel. Can't find the oil filter location. Can you please help me Thanks


It's a cartridge type filter that sits inside a vertical canister attached to an oil cooler that has (2) hoses coming out of it at the rear of the engine block behind the timing belt cover on the drivers side of the engine bay

Aug 28, 2016 | Holden Cars & Trucks

1 Answer

Where is the location of oil filter in holden astra 98


Hi there:
On the top of your engine there should be a location with a plastic cover with 3 torx screws. Remove those 3 screws. You will see an aluminum cover. Remove these 36mm bolts. You will then see the filter to change it.

Apr 19, 2014 | Holden Astra Cars & Trucks

1 Answer

Location of oil filter


It is located on the driver's side of the engine. To see what it looks like, go to REALOEM.com and enter the last seven digits of your VIN or month and year of production from the car's name plate.
Select Main Group 11 Engine, Subgroup 11 30 Lubrication System, then select diagram "E93 323i Lubricat.syst.-oil filter, heat exchanger"
For example a 2009 323i uses part numbers
11427548032 for aluminum housing, 11427525334 for the oil filter cover (usually plastic) which uses a special wrench for removal, and 11427566327 for the cartridge type oil filter and o-rings.

Aug 11, 2013 | 1999 BMW 323 Series

2 Answers

Holden captiva is lacking in power, check engine light comes on and traction control lights come on and decline ascent light on dash shortly followed by service light and a large clunk sound. The motor...


I got a same problem in Holden Captiva diesel 2010 model as soon as you accelerate on traffic light the traction control light comes on engine light on dash, engine lack of power, turn the engne off for few seconds and goes ok but engine light stays on dash. Checked with the tech tool, it comes fuel metering code, can bus code... What it could be????. I've already changed fuel filter and did general service, still comes on. ANY IDEA PLEASE. OR I BURN THIS CRAPTIVA

Oct 13, 2011 | Cars & Trucks

1 Answer

Where is the oil filter located on a 2008 SRX V-6


the oil filter is a canisted type and is located under plastic engine cover lift the cover up on top of the motor and its on the driver side , it requires a 1 inch socket to change.

Jan 29, 2011 | 2008 Cadillac Srx

3 Answers

Were is locate the oil filter for the borrego 2009 4.6


I have an '09 Borrego, the oil filter is located on the front of the motor below the harmonic balancer,
To access it remove the lower valenca panel under the front behind the bumper. There are 7 bolts holding the panel on, remove all 7 bolts and the panel will drop free. You will see the oil filter housing just above the sway bar and below the harmonic balancer. You can use a 1-1/16" socket and a 6"-12" extension to remove the filter cap. Make sure to get the V-8 filter, it is not the same as the 6 cyl filter.

Oct 07, 2010 | 2009 Kia Borrego

2 Answers

Were is the oil filter on my scion xd 2008


2008 Scion xD oil filter is a cartridge (element only) type. It is located under a heavy, black plastic cap right next to the oil drain plug. To remove the cap, you will need a Toyota "Special Service Tool" or an Assenmacher Specialty Tools "TOY640" or similar cap wrench. Toyota is the only source for the oil filter element; make sure you get a new o-ring (should be in the box with the filter element) and a new drain plug gasket.

Nov 24, 2009 | 2008 Scion Xd

1 Answer

Where is oil filter located on 2008 Cadillac CTS 6 cylinder


The Location of the oil filter depends on which engine you have in your CTS. the 3.2 engine the oil filter is located on the bottom of the engine to the left of the oil pan. It is not a screw on type filter it is a canister filter. You will have to unscrew the lid to gain access to the oil filter. On the 3.6 Engine the oil filter is also a canister filter but it is located on the top side of the engine. On the drivers side around the center of the engine cover. It will take a 15/16 socket to remove the lid.

Aug 15, 2009 | 2008 Cadillac Cts

1 Answer

Fuel filter location


The oil filter is in an aluminum cylinder on the engine. It is not a "spin on" filter, it is now a cartridge-type filter. When you get one, make sure that you use the new o-rings provided in the filter box. The fuel filter is in the tank. Hope this helps, the graciousness of a FixYa rating would be appreciated. Thanks.

Dec 09, 2008 | 2008 Toyota Avalon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Holden Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14337 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...