Question about 2008 Chevrolet Tahoe LTZ

1 Answer

Uo 101 lost communication with tcm

I took it to work shop still nothing

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 13,027 Answers

So what is your Question ? Most of the time these U codes happen because of a bad connection . The first thing to do is check power and grounds for said module . Is this vehicle able to start an run ?
Modules connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. The modules have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver module as an availability indication of the transmitter module. Each message contains the identification number of the transmitter module.
The body control module (BCM) and the serial data gateway module (SDGM) activate various modules by applying voltage to communication enable and wake up circuits when the ignition key is in ACC, ON or START. Refer to the schematics to determine which modules are activated by each wake up or enable circuit.

Posted on Dec 14, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

It runs for about 20 mins then cuts out and dies

I'd suggest to do a full computer diagnostic.

Jun 24, 2015 | Cars & Trucks

1 Answer

Torque converter

Rebuilding a gearbox doesn't replace the worn shafts or bearings.

Aug 18, 2017 | Suzuki Sidekick Cars & Trucks

1 Answer

I had problems with my 1999 nissan frontier overdrive. It runs great but wont go into overdrive. Took it to auto shop they kept it for 4 days. Replaced Neatrul Safety switch and 300.00 later it still

The Neutral Safety Sw has nothing to do with the
transmission- as far as how it shifts

If the trans is original (14 years old) time to pull it
& rebuild

I think you answered your own question
You authorized the work,paid for it & could
have asked any question you liked ,when you
took delivery of it.

Did you not road test with shop folks, before paying
to see if the issue was resolved ?

Feb 24, 2014 | 1999 Nissan Frontier

1 Answer

Ac blows hot air

I have had a similar problem quite a few years ago. You don't mention the model or year of your vehicle. It could be a relay that is on the firewall just below or behind the firewall in engine compartment in front of driver's side of the car. It took a really savvy MB mechanic an hour to locate and fix after 2 months in other shops, including an MB dealership. Mine was a 1988 560SEL that had that problem. After that was fixed, it worked perfectly for another 5 years - at which time I sold the car.
I hope this helps...

Oct 09, 2017 | 1999 Mercedes-Benz CLK

1 Answer

2002 ford escape starts but wont stay running unless the foot is kept on the pedal. took it to a shop and had a diagnostic test on it. It's saying there is nothing wrong. Mechanic said it must be

Computers rarely fail. The diagnostic would not show anything wrong unless a trouble code is set UNLESS the diagnostic used live data vieew. Most shops dont do that . So at what RPM does it not die? How many miles are on it? Ford uses something called an idle air speed motor. They are prone to fouling.

Mar 31, 2013 | 2006 Ford Escape

1 Answer

If they disconnect the battery on a 2001 bmw x5 does that interfere with the speedometer

All is controlled by the computer. When you disconnect the battery for a period of time, after reconnect the computer will reset. Nothing works without the computer telling it to.

Nov 17, 2012 | 2001 BMW X5 4.4

1 Answer

I have a '03 Toyota Celica GT-S with a annoying mis-fire. Started small by replacing all spark plugs - nothing. Replaced the MAF sensor - nothing. Took it to a authorized toyota shop & checked...

Replaced the MAF sensor - nothing. Took it to a authorized toyota shop & checked compression which check out good and put the computer on. Computer read mis-fire on cylinder 1, and then multiple misfire (like it would jump around). We went ahead and replaced the fuel injector on cylnder 1 - did not solve problem as when we hook the computer up, misfire seemed tp stay at idle and seem better when running high RMP, but check engine light is on as it never went away. Went ahead and replaced the coil pack to cylinder 1 - nothing. what am i missing?

Feb 06, 2011 | 2003 Toyota Celica

2 Answers

Riding rough what do i change with these codes po171, po174, po300

171 and 174 are lean mixture codes, 300 is a random misfire (any cylinder). Check for a vacuum leak, listen for a hissing noise with engine idling.

Mar 04, 2010 | 2002 GMC Sierra 1500

1 Answer

Outback 2002 subaru - Rear view mirror foggy; stopped working

there is nothing the shop did the that caused this they do that because of the heat inside the car sitting out in the sun

Sep 26, 2009 | 2002 Subaru Outback

Not finding what you are looking for?
2008 Chevrolet Tahoe LTZ Logo

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides