Question about 1995 Geo Metro
Ok penny , you have a G16 engine
and no spark, that mean at all 4 spark plugs and the coil?
5 places, ?
if the coil makes spark, but not at plugs. that means
the cam belt slipped, did you forget to do the 60,000 mile service?
turn crank by hand does distributor rotor spin?
No , belt snap.
same check , look and oil filler hole, does the cam spin? , cranked hand turned.?
no ?, belt is gone. CAM TIMING BELT.
yes turns, then check compression (a tool) at wide open throttle.
if compression is over 150 PSI, then ok
if way low, like 80 the cam belt is slipped,
all easy tests, all less that 20 bucks in tools.
FIRST check fuses.
then check that the Check engine light glows key on
if not , there is no DC electrical power to the ECU (injection system or spark or both. the ECU cuts fuel for no spark, (hint))
there are 3 fuses, that must be good, to start any suzuki this year.
2 are critical.
if all this is klingon ?
get it serviced.
Posted on Dec 14, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You might want to see if the timing belt might have jumped.If you getting gas and spark it should of fired.Try this Hold the gas pedal to the floor and crank on it for a few.By doing this you shut off fuel flow to motor and it tries to burn what has been injected.Don't let off of the pedal or make sure to press down before cranking.Maybe it flooded it self by cranking slow..If car still does not start after cranking the motor over a few times spay some starting fluid into the intake or throttle body and try to start.If fires and misses back fires has a slow pedal response its more than likely the timing belt....
Posted on Mar 29, 2009
SOURCE: 95 geo metro
I just did my 95.
The bottom outside pulley has a little cut in it,and its little.Line that at 5 degrees the 3rd line on the plastic marker.
Now on the cam,there`s 2 marks.use the one that has the nipple under it and line it with the v on the back plate.
Posted on Jul 13, 2008
It needs a fluid change,and filter,in the transmission,also,add a additive called LUBEGUARD from napa auto parts,when you ask for the additive,be sure to get the one for gm,this additive keeps the valve body slick,and moving,this is the problem,your filter,and ,or,the fluid is dirty,and causing hydraulic problems,and valves to stick in the valve body in the transmission.
Posted on Mar 15, 2010
Tips for a great answer:
Mar 20, 2015 | 1997 Geo Metro
Oct 30, 2012 | 1995 Geo Metro
Jan 01, 2012 | 1992 Geo Metro
Jun 05, 2017 | 1995 Geo Metro
Nov 26, 2009 | 1992 Geo Tracker
Jul 09, 2009 | 1994 Geo Metro
114 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: