Question about 2000 Chevrolet Tracker

1 Answer

When I first start my 2000 4dr Chevy Tracker 4X4 2.0L engine it starts fine, but there is very loud vibration. My driveway is sloped downhill but after I reverse out of my driveway it stops. Then when

Nothing since I am not sure what it could be.

Posted by on

  • Martha Barragan Dec 14, 2014

    When ever I am stopped with my brakes on of course, at a light that is on a downhill slope the vibration starts again and it is loud. I just had all 4 of my brakes replaced and I replaced my catalytic converter in July 2014. Maybe some one else will think of something else it could be. Thanks.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Look at your engine mounts.

Posted on Dec 14, 2014

Testimonial: "A friend of mine kind of looked at the engine mounts and he could not see anything loose. However, he is going to put my car up on a lift so he can get a better look. One thing I failed to mention, it seems to get louder when I have the Heater Defrost on since it turns the A/C on to help defrost the windshield. As the A/C kicks on and off, the vibration seems louder at those times. Thank you for your help and I will let you know what we find if and when we do. Especially since I do not see any one else with a similar issue. Any Ticks and Knocks but no very loud Vibrations. Hmmmm...."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2011 Toyota Camry cruise control does not hold speed at all, when going downhill; is this normal?


Yes, cruse control only controls engine functions, it does not control braking.

Jun 22, 2015 | 2011 Toyota Camry

1 Answer

Isuzu 4jx1in 2003 Jackaroo with nose facing downhill at severe slope motor stops will not re start until car is on level plane. Apart from this it goes brilliant? Thank you


About the only thing stopping an engine on a severe slope is a fuel problem. If a carby then the float level is suspect. If efi then the tank pick-up may not be in the fuel. Check that the canister is not filling with fuel and flooding out the engine. Consider does the same apply when facing up hill on the slope.?

Aug 24, 2013 | Cars & Trucks

1 Answer

2003 ford explorer with a loud metal rattling noise sometimes it will vibrate too


Could be cam chain rattle. Famous for sloppy chains and inferior tensioners. Starts about 100k and downhill from there. Could try an engine flush as tensioners may be sludged. I have a 4.0L with a rattle at start up but stops after 5 seconds. Chain is shot.

Feb 26, 2013 | 2003 Ford Explorer

1 Answer

2003 chevy tracker starts ok cold; but when hot it starts and then stalls.


It could be a clogged catalytic converter or bad o2 sensor. go to autozone and have them scan it ( for free) and post what codes and probable fixes they give you (they'll give you a print out)

Jan 28, 2013 | 2003 Chevrolet Tracker

1 Answer

My 2000 chevy tracker wont start


if you have not changed the camshaft position sensor you need to do that sounds exactly like my problem got the new fuel pump and filter in there and it was fine for a month then same thing started happening again, been fine for 7 months since I changed my camshaft position sensor

Nov 23, 2012 | 2000 Chevrolet Tracker

1 Answer

Chevy uplander traction control seems to be working all the time


Can you feel the vibration through the steering wheel if so have your front discs machined & the front pads replaced. Or are you feeling the vibration through the pedal? if so it may be the rear but start with the front.

Jul 15, 2012 | 2005 Chevrolet Uplander

1 Answer

Loud grinding noise within the engine and stalling after braking hard


Flex plate is cracked. That is another reason it stalls.

Nov 08, 2011 | 1996 Eagle Vision

1 Answer

I own a 2001 Dodge Grand Caravan..3 days ago it started acting up. I pulled out of a driveway and started somewhat slowly up a hill and the van shut off. I was able to start it, get it up the hill but when...


Hi tinkerbel925

Have you tried scanning it with a scan tool? If this much is going wrong there should be a check engine light on. This will tell you what is making your van do all that crazy stuff.

-hopeufixit-

Jun 03, 2011 | 2001 Dodge Grand Caravan

1 Answer

2002 Chevy Tracker will not idle


I would start with a new fuel filter and some new spark plug wires.

Jul 10, 2010 | 2002 Chevrolet Tracker

1 Answer

Question on gears of a 1997 Toyota Corolla


you said it 1.3 litre engine,great cars very economical ideal for a shopping basket

Dec 21, 2008 | 1997 Toyota Corolla

Not finding what you are looking for?
2000 Chevrolet Tracker Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...