Question about 1998 Ford Crown Victoria
This is what I did on my 99 Grand Marquis. Maybe it will work for you.
1. Turn ignition from OFF to RUN 4 times within 3 seconds, with the 4th time ending in RUN. Door locks will cycle to confirm programming mode.
2. Within 20 seconds, press any button on first keyless remote. Door locks will cycle to confirm programming.
3. Within 20 seconds press any button on second keyless remote. Door locks will cylcle to confirm programming.
4. Turn ignition to OFF.
Posted on Dec 14, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i would have to say to check for a relay in your fuse boxes for power steering pressre switch or it may have its own police pkgs have a lot of relays due to all the extras
Posted on Sep 11, 2008
SOURCE: 2003 Ford Crown Vic Misfire
milage on this shouldn't matter, the light being on is probly just stuck, however you maay wanna check to be sure the brakes aint hangin up a little,
Also the surging can be causeed by the fuel pump goin out, may not be the case but something to look for, it will show up as random misfires as well, maybe try a good fuel addative, (could have a little water in it, check the fuel filter as well, alot of cars now days have a charcol filter and when they go bad they can be a issue, Pick up tube could also have a hole in it, the fuel pumpo on theese cars should be in the tank and are not fun to replace,
hope one of theese suggestions helps, there are many thing that can cause the problem your describing
Posted on Jan 08, 2009
SOURCE: Replace horn on 2006 crown vic
I believe once you have mounted the horn and connected the wire you will find that the horn wire was cut at (by) the steering coloum that the siren override was hooked to,you will have reconnect this,I hope this helps you
Posted on Jul 04, 2009
SOURCE: airbag light on
Common fault on FORD
Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.
Just push it together properly and it should clear the AirBag fault
Posted on Sep 06, 2009
Tips for a great answer:
Dec 19, 2015 | 1997 Ford Crown Victoria
Nov 27, 2011 | Ford Crown Victoria Cars & Trucks
Apr 19, 2011 | 1984 Ford Crown Victoria
Aug 17, 2010 | 1985 Ford Crown Victoria
May 05, 2010 | 2003 Ford Crown Victoria
Mar 23, 2010 | 1995 Ford Crown Victoria
Oct 05, 2009 | 2000 Ford Crown Victoria
Oct 05, 2009 | 1984 Ford Crown Victoria
Mar 12, 2009 | 2003 Ford Crown Victoria
Mar 09, 2015 | 1998 Ford Crown Victoria
115 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: