Question about 2002 Jaguar S-Type

1 Answer

Fuel system can wound turnover

Replace fuel pump replace fuel filter,replace fuel sensor

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Jaguar Master
  • 1,632 Answers

Also replace fuel presure regulator

Posted on Dec 14, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to Replace a Fuel Pump and Fuel Filter in a Cadillac


The Cadillac has an electric fuel pump, and you should check its fuses and relays and ensure you have fuel before inspecting the pump. If your vehicle still has difficulty getting fuel, you can clean or replace the fuel pump.

Things You'll Need:
Fuel pump kit
Fuel tank sending unit wrench
Torque wrench Replace the fuel pump is challenge.
1.Determine which fuel pump your Cadillac Escalade will need. This depends not only on the make and model, but also the engine size. Models built from 1998 to 2000 have a 5.7 L engine, 2002 to 2006 models may have a 5.3 L or 6.0 L engine and models built after 2006 have a 6.2 L engine.
2.Prepare your vehicle for fuel pump servicing. Disconnect the negative battery cable. Relieve the fuel system pressure, drain and disconnect the fuel tank.
3.Disconnect the fuel and evaporative emission lines from the fuel tank. Remove the fuel sender assembly and the seal with a fuel tank sending unit wrench, and pull the strainer off the fuel sender. Remove the fuel pump's electrical connector and its retaining clip from the fuel level sensor. Remove the fuel sensor's electrical connector from the fuel sensor in addition to its retaining clip.
4.Remove the fuel level sensor by squeezing the locking tangs and remove the fuel pressure sensor. Discard the old fuel tank seal and fuel strainer.
5.Install the new fuel pump using the items included in the kit and be to replace the fuel strainer and seal. Use a torque wrench to tighten the attaching bolts for the fuel tank strap to 30 ft. lbs.
The following is the instructions of replacing fuel filter:
The symptoms of a bad fuel filter include a loss in horse power, very sluggish acceleration and, in some cases, difficulty starting. Replacing the fuel filter is always the best policy because you can't reliably unclog a filter. In the Cadillac Escalade, 2002-2006, they replace easily. The 5.3L engine filter replaces in a different way. Manufacturers suggest replacement of fuel filter every 60,000 miles.
Replace the fuel filter is easy.
1.Locate the fuel filter. Normally this is on the passenger side wheel well or just inside the engine compartment. In the Cadillac Escalade, it mounts on the fuel tank and is integral with the fuel pump assembly. Before removal of the filter, disconnect the negative battery cable and relieve the pressure in the fuel system.
2.Lift the vehicle to gain access to the fuel pump assembly. Remove the threaded fittings from the filter and cap the fuel pipes to prevent contamination. Inspect the o-rings on the fuel pipes and replace if deteriorated.
3.Change the filter and reattach the fittings immediately. Tighten the fittings to 18 foot pounds. Remount to the clip and lower the vehicle. Reconnect the negative battery cable and start the ignition. To fill the filter and get gas to the ignition system, turn the ignition on for two seconds and then off for ten seconds. The vehicle should start after this.
4.Replace the fuel filter at the first opportunity. Filters are not serviceable items, they are disposable. Never rely on a clogged fuel filter for any length of time

on Sep 21, 2011 | 2004 Cadillac Escalade

2 Answers

2010 f150 wont start will turnover but no start cant hear the fuel pump start either


sounds like either the fuel pump relay or the fuel pump itself has gone out. check fuse panel first then check fuel pump relay. if those are good then check power leads to pump at tank and if you have power there then the pump has probably failed. hope this helps. Chris

Mar 20, 2014 | 2010 Ford F-150 Regular

1 Answer

Tries to turnover but wont start


Check to see if you're getting spark at the plugs. If not, try changing the ignition module. If that doesn't fix it, then you possibly have a fuel delivery problem. Check the pressure at the fuel rail. If it's too low, or even non-existent, then replace the fuel pump (mounted inside the fuel tank). Be sure to replace the pump strainer and fuel filter, too, if you change the pump

Jan 29, 2013 | 1996 Ford Contour

1 Answer

The truck was sitting for about 10 years, everything electrical works, i replaced the spark plugs, wires and rotor before even trying to turn it over, the engine wants to turnover and the spark plugs are...


if its carberated, u need to clean that out. if its fuel injected, replace the fuel filter. if it stil dont work. then u have a fuel injector problem

Mar 05, 2010 | 1986 Toyota 4Runner

1 Answer

Location of fuel filter 1995 Nissan Maxima


  1. This is if it is an internal filter, if it is not you still have to pull the whole bottom of the back seat out and look for the inspection plate.
  2. Relieve the fuel system pressure by first removing the fuel pump fuse. Then, start the engine and allow it to run until it stalls. Crank the engine for 2 to 3 seconds to release the pressure Turn the ignition off.
  3. Step 2 Disconnect the negative battery cable. Remove the rear seat bottom and the inspection hole cover. Disconnect the electrical and quick connectors and remove the six screws. Remove the fuel level sensor unit and the fuel pump assembly. Then, take out the flange and snap fit portion of the fuel pump.
  4. Step 3 Remove the fuel tank temperature sensor harness, the fuel level sensor flange, and the fuel pump connector. Disconnect the quick connectors from the fuel level sensor, and remove the fuel level sensor from the chamber. Take out the fuel filter.
  5. Step 4 Put the new fuel filter in the chamber, followed by the fuel level sensor. Attach the quick connectors to the fuel sensor. Connect the fuel pump connector and put the fuel level sensor flange and fuel tank temperature sensor harness back.
  6. Step 5 Place the fuel pump assembly inside the tank. Replace the screws and electrical connectors. Reattach the quick connectors. Reconnect the negative battery cable.
  7. Step 6 Start your car and check for leaks, and make repairs if necessary. When repairs are complete, replace the inspection hole cover and the rear seat bottom.

Feb 03, 2010 | 1995 Nissan Maxima

3 Answers

Staring ford 1992 f150


u will need to replace the fuel pump. The pump is located inside the fuel tank, remember to replace the fuel filter also or the new pump warranty will be voided.

Feb 09, 2009 | 1992 Ford F150 SuperCab

Not finding what you are looking for?
2002 Jaguar S-Type Logo

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...