Question about 2003 Ford Escape

1 Answer

How to replace the engine/transmission mounts on 2003 ford escape V-6 4 wheel drive?

I inspected them and the closest to radiator look like it is installed wrong.it has a rubber mount on the out side of the metal cup.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Ford Master
  • 1,632 Answers

Remove shields and main centre bar , use heat or have to cut bolts and replace them , replace all 4 engine and transmission mount as one goes all goes . Get original parts as the rubber on other ones will not hold and has to be replaced very soon again , especiallly with sport driving conditions . A mufler shoppe is best for this work .

Posted on Dec 14, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I'm trying to remove the transmission because it needs to be rebuilt. I cannot locate the bell housing cover however in order to remove the torque converter to drive plate bolts. Can you assist?


There is an inspection plate under the car at the bell housing. Remove the bolts and hand turn the engine over and start removing these bolts you see.

Mar 08, 2016 | Ford Cars & Trucks

1 Answer

How to replace 2006 ford escape left front axle shaft


How to Replace a CV Axle on a Ford Escape / Mazda ...

? 9:41
https://www.youtube.com/watch?v=_JxagNLBlQ4
Aug 29, 2013 - Uploaded by klowny1969
Axle nut should be torqued to spec..in the ford escape its around 205-220 lbs ft How To Change An Axle On A Front Wheel Drive Car ! SUBSCRIBE ! ... How to Replace a Front Axle Half Shaft - Duration: 14:37. ... Alternator replacement 2005 2006 Ford Escape 3.0L DOHC All Wheel Drive - Duration: 13:15.

Front axle replacement Ford Escape 2003 Right front CV ...

? 8:46
https://www.youtube.com/watch?v=JQK8SPj6Qsk
Mar 29, 2014 - Uploaded by Fixing cars and stuff
Front axle replacement Ford Escape 2003 Right front CV axle install remove replace This Channel provides ...

Feb 03, 2016 | Ford Cars & Trucks

2 Answers

#6 cylinder 2001 escape


the cylinders in the back ( closest to the firewall ) from left to right 1-2-3
in the front ( closest to the radiator ) from left to right 4-5-6. front far right cyl.

Apr 14, 2013 | 2001 Ford Escape

1 Answer

Engine light keeps saying 02 sensor is bad on 2003 Ford Escape


do you know if which one they replace. there is 4 on your ford escape

Jan 23, 2013 | 2003 Ford Escape

1 Answer

Transmission is leaking from my 2008 ford escape. The VIN number does show that it was manufactured in Kansas, but because i am in Canada the recall did not include canadian owners.


What do you need? I would cantact Ford of Canada in back of owner manual with letter, not phone, if issue is the same. TEXT:

In some of the affected vehicles, the transmission fluid cooler may develop a crack in the tube below the right hand (RH) mounting bracket from thermal and vibration fatigue. This may lead to a small transmission fluid leak and possible rough / harsh shifts. Dealers are to inspect the transmission fluid cooler for a grommet and possible fluid leak below the RH mounting bracket. Based on the results of the inspection, dealers will perform one of the following service

actions:

INSPECTION

1. Using a suitable light, look through the radiator grille and inspect the transmission fluid cooler mounting bracket for a grommet behind the mounting bolt. See Figure 1 and Figure 2.


Inspection Result Service Action

Grommet present - No further action required


Grommet not present and transmission fluid cooler not leaking - Install transmission fluid cooler mounting bracket


Grommet not present and transmission fluid cooler leaking - Install new transmission fluid cooler.

-----------------------------------------------------------

In some of the affected vehicles, the transmission fluid cooler may develop a crack in the tube below the right hand (RH) mounting bracket from thermal and vibration fatigue. This may lead to a small transmission fluid leak and possible rough / harsh shifts.

Dealers are to inspect the transmission fluid cooler for a grommet and possible fluid leak below the RH mounting bracket. Based on the results of the inspection, dealers will perform one of the following service

actions:

INSPECTION

1. Using a suitable light, look through the radiator grille and inspect the transmission fluid cooler mounting

bracket for a grommet behind the mounting bolt. See Figure 1 and Figure 2.


Inspection Result Service Action

Grommet present No further action required

Grommet not present and transmission Install transmission fluid cooler mounting bracket

fluid cooler not leaking

Grommet not present and transmission Install new transmission fluid cooler
fluid

May 24, 2011 | Ford Escape Cars & Trucks

1 Answer

What is required to get done on a 60k mile maintenance schedule?


60,000 Mile Service Schedule
  • Inspect 4x2 front wheel bearings; replace grease and grease seals, and adjust bearings
  • Change automatic transmission fluid
  • Inspect automatic transmission fluid level (if equipped with underhood dipstick)
  • Replace fuel filter
  • Perform multi-point inspection
  • Inspect and lubricate all non-sealed steering linkage,ball joints,suspension joints,half and drive-shafts and u-joints
  • Inspect brake pads/shoes/rotors/drums, brake lines and hoses, and parking brake system
  • Inspect complete exhaust system and heat shields
  • Inspect engine cooling system and hoses
  • Replace engine air filter
  • Change engine oil and replace oil filter (Up to 5 quarts of oil. Perform at specified mileage interval or every 6 months, whichever occurs first)
  • Rotate and inspect tires; check wheel end play and turning noise

Sep 14, 2010 | 2004 Ford F150

2 Answers

Can anyone tell me where the bank 1 sensor 2 for the oxygen sensor is for a 2003 ford escape


sensor two is behind the convertors if you have a four cyl its the only sensor behind cat if its a 6 cyl then the side of engine closest to firewall is bank2

Jul 23, 2009 | 2002 Ford Escape

1 Answer

How do you replace a power steering fluid pump on a 2003 ford escape? It looks like its internal and I may have to pull the motor? please help!


it is directly under the upper engine mount on the passenger side. simply block up the engine from underneath and remove the upper engine mount (5 - 18mm bolts)

Jul 13, 2009 | 2003 Ford Escape

1 Answer

Which is the #4 piston on a2005 Ford Escape?


This depends on which engine you have. If your Escape is a 4 cylinder, #4 piston is the one closest to the battery. If you have a V6, it is the one closest to the passenger side headlight.

Jul 08, 2009 | 2003 Ford Escape

Not finding what you are looking for?
2003 Ford Escape Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...