Question about 2010 Mazda BT50 L

1 Answer

Where would I get a armrest centre console for a mazda bt 50 2010

Most ot the breakers around sydney

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 3,368 Answers

Try your local salvage yard.

Posted on Dec 14, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the power armrest control located?


It should be in the vicinity of the armrest....Is this a door armrest or center console armrest? In either case, the adjustment will be near to the armrest, like the seats have an adjustment at the hinge area.

Mar 31, 2016 | 2000 Isuzu Trooper

1 Answer

I would like to know why is the distributor arking on my Mazda B2200 1992


Hi Gordon:
Distributors are made with a non-conductive shell, a contact point in the centre, and a rotor that directs the spark from the centre ot the spark plug wire terminals. Any number of things can happen to the distributor cap that will create a conductive path or short circuit that will result in arcing.
Some examples:
- not correctly secured
- cracked
- condensation present
- dirty

Jul 13, 2015 | Mazda Cars & Trucks

1 Answer

Manual for Mazda BT 50 I can not rember how to re set the the frigde ?


  1. Mazda BT-50 - CarsGuide

    www.carsguide.com.au/mazda/bt-50 CarsguideBT-50 Car Showroom Online: Discover BT-50 Pictures, Videos, News & Reviews: ... My 2007 Mazda BT-50 ute had a very smelly clutch problem after rever.

Jul 12, 2015 | Mazda Cars & Trucks

1 Answer

How to fit an upgrade armrest on an x type jag?


The center arm rest is attached to the console by 2 small Hex cap screws. The arm rest and intermediate slide panel are attached to the same hinge assembly with rivets.
to replace the upper arm rest, 1st remove the assembly from the console by removing the 2 hex screws this will allow you to work outside of the vehicle on a work bench. 3 rivets hold the arm rest to the hinge. You will need to drill out the rivets using a 1/8" drill bit. and install the replacement arm rest using new 1/8" pop rivets.
see illustration

section-ai1d4ga3barerea5mewg0gzj-4-0.jpg

Feb 07, 2015 | Jaguar X-Type Cars & Trucks

2 Answers

Tengo una mazda BT-50 y la luz indicadora RFW LOCK no se apaga??


tengo un mazda bt-50 pro cabina sencilla y el radio se me desconfiguro tengo q poner tres codigos de cuatro numeros cada uno q me ayuden xfaaa diganmee esos codigos se les agradece

Feb 25, 2012 | 2005 Mazda B-Series

1 Answer

Mazda MX5. How do I remove the centre air vents so I can remove the centre console


Hi, really easy if you know how! Use a curved piece of wire to hook in and behind the eyeball (I bend one into a tight U shape push in and pull back) grasp wire tightly and pull hard. It feels as though they will break but they wont, they're held in with clips behind the fascia.The Centre console is held with clips also and two screws either side of the gear knob on the sides. When the screws are removed, pull hard again to remove the console. Good luck!

Jan 19, 2010 | 1990 Mazda MX-5

1 Answer

How do I remove the door panel and replace the inside door handle


PLEASE DON'T FORGET TO RATE!!

Door Panel
  1. Remove the door handles and the locking knob from the inside of the doors.
If equipped with screw retained door pull handles, remove the screws through the handle into the door inner panel.
  1. If equipped with remote control mirrors, remove the remote mirror escutcheon, then disengage the end of the mirror control cable from the escutcheon.
5670a53.gif
Door lock remote control handle

849dcc4.gif
Removing the clip from inside the door handle

3. If equipped with a switch cover plate in the door armrest, remove the cover plate screws, then disconnect the switches and the cigar lighter (if equipped) from the electrical harness.
4. If equipped with an integral armrest, remove the screws inserted through the pull cup into the armrest hanger support. If equipped with an armrest applied after the door trim installation, remove the armrest-to-inner panel screws.

7c4bfcc.gif
View of the armrest switch cover plate and remove mirror cable attachment

  1. If equipped with two-piece trim panels, disengage the retainer clips from the front and the rear of the upper trim panel, using tool No. BT-7323A, then lift the upper door trim and slide it slightly rearward to disengage it from the door inner panel at the beltline.
If equipped with electric switches in the door trim panel, disengage the electrical connectors from the switch assembly.
  1. Along the upper edge of the lower trim panel, remove the mounting screws. At the lower edge of the panel, insert tool No. BT-7323A between the inner panel and the trim panel, then disengage the retaining clips from around the outer perimeter. To remove the lower panel, push the panel down and outward to disengage it from the door.
If equipped with courtesy lights, disconnect the wiring harness.
  1. If equipped with an insulator pad glued to the door inner panel, remove the pad (with a putty knife) by separating it from the inner panel.
To install:
If replacing the inner pad to the door inner panel, use 3M General Trim Adhesive No. 8080, glue it to the panel.
  1. If removed, glue a new inner pad to the door inner panel.
If equipped with courtesy lights, connect the wiring harness.

e8e7539.gif
Exploded view of the window regulator handle

4df80bc.gif
Exploded view of the door trim panel

  1. Engage the retaining clips around the edge of the lower trim panel, then install mounting screws.
If equipped with electric switches in the door trim panel, engage the electrical connectors to the switch assembly.
  1. If equipped with two-piece trim panels, engage the retainer clips to the front and the rear of the upper trim panel.
  2. If equipped with an integral armrest, install the retaining screws.
  3. If equipped with a switch cover plate in the door armrest, engage the switches and cigar lighter (if equipped) harness connectors, then install the cover plate and secure using the plate screws.
  4. If equipped with remote control mirrors, engage the control cable, then install the remote mirror escutcheon.
If equipped, install the pull handle screws through the handle into the door inner panel.
  1. Install the door handles and the locking knob to the inside of the doors.
3e5ae04.gif
Exploded view of the 2-piece door trim

  1. Remove the door handles and the locking knob from the inside of the doors.
If equipped with screw retained door pull handles, remove the screws through the handle into the door inner panel.
  1. If equipped with a switch cover plate in the door armrest, remove the cover plate screws, then disconnect the switch
from the electrical harness.
  1. If equipped with an integral armrest, remove the screws inserted through the pull cup into the armrest hanger support. If equipped with an armrest applied after the door trim installation, remove the armrest-to-inner panel screws.
  2. If equipped with two-piece trim panels, disengage the retainer clips from the front and the rear of the upper trim panel, using tool No. BT-7323A, then lift the upper door trim and slide it slightly rearward to disengage it from the door inner panel at the beltline.
If equipped with electric switches in the door trim panel, disengage the electrical connectors from the switch assembly.
  1. Along the upper edge of the lower trim panel, remove the mounting screws. At the lower edge of the panel, insert tool No. BT-7323A between the inner panel and the trim panel, then disengage the retaining clips from around the outer perimeter. To remove the lower panel, push the panel down and outward to disengage it from the door.
If equipped with courtesy lights, disconnect the wiring harness.
  1. If equipped with an insulator pad glued to the door inner panel, remove the pad (with a putty knife) by separating it from the inner panel.
To install:
If replacing the inner pad to the door inner panel, use 3M General Trim Adhesive No. 8080, glue it to the panel.
  1. If removed, glue a new inner pad to the door inner panel.
If equipped with courtesy lights, connect the wiring harness.
  1. Engage the retaining clips around the edge of the lower trim panel, then install mounting screws.
If equipped with electric switches in the door trim panel, engage the electrical connectors to the switch assembly.
  1. If equipped with two-piece trim panels, engage the retainer clips to the front and the rear of the upper trim panel.
  2. If equipped with an integral armrest, install the retaining screws.
  3. If equipped with a switch cover plate in the door armrest, engage the switch harness connector, then install the cover plate and secure using the plate screws.
If equipped, install the pull handle screws through the handle into the door inner panel.
  1. Install the door handles and the locking knob to the inside of the doors.

Nov 16, 2009 | 1987 Chevrolet Monte Carlo

1 Answer

Is there any permanent battery wiring that I can tap into around the centre console area that isn't too difficult to get to. It's for a hands free car kit.


You should be able to tap into the power wire for the cigarette lighter. You may have to pull some panels off to get to it.

Aug 19, 2009 | Mazda MAZDA3 Cars & Trucks

1 Answer

Exchanging dash centre console


actually no you can't, these are wired a certain way and cannot be changed with out changing all of the wiring.

May 12, 2009 | 2004 Mazda 6

1 Answer

Audi A3 centre armrest has become stuck on the upright position. what to do??


hi my car comes with a centre armrest but it use to adjust to different hights but its not doing it now

Aug 01, 2008 | 2005 Audi A3

Not finding what you are looking for?
2010 Mazda BT50 L Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...