Question about 2006 Chrysler Pacifica

2 Answers

I have a 2006 pacifica. I have no brake lights (left right). When I press the brake pedal, I hear a click sound coming from under the shifter area. Weird?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 74 Answers

No not weird that clicking sound is your shift lock it's supposed to make that sound first check
Brake light fuse if that is good check brake light switch witch is mounted under the dash above the brake pedal somtimes they can unadjust them selves and the switch doesn't hit the pedal or it is just bad and if that's not the problem it's the module that you will have to take to a repair shop

Posted on Dec 13, 2014

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

That's normal as you have to apply the brakes to remove the shifter from the park position. I will try to remember what was done to the one I repaired a few months ago but check the bulbs first.

Posted on Dec 13, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 87 Answers

SOURCE: 1993 Nissan Pathfinder XE-V6 right-side BRAKE PROBLEMS ????

THE CLICKING NOISE IS THE SHIFTER LOCK RELEASING, NOTHING TO DO WITH BRAKE LITES. CHECK FOR GOOD GROUNDS AT REAR LIGHT SOCKETS.

Posted on Jun 17, 2009

joecoolvette
  • 5660 Answers

SOURCE: Clicking noise inside when braking

From your description it sounds like you have a bad CV joint, in the front.
This example shows what the CV joint, and axle together, looks like for the Drivers side. (Not advertising for these people)
http://www.1aauto.com/1A/Axleshaft/Jeep/GrandCherokee/1AACV00009/1042202/

Posted on Jul 26, 2009

rockitman187
  • 2559 Answers

SOURCE: Jeep stuck in park!

Unsrew the top of the shifter and reattach the rod for the button

Posted on Jul 29, 2009

MNfisherman
  • 11896 Answers

SOURCE: electrical problem

neutral/safety switch is most likey faulty

Posted on Oct 13, 2009

bdubsee
  • 75 Answers

SOURCE: 2006 HHR with automatic transmission. I hear a

This time only, your dealer is right. The sound is the Brake to Shift Interlock (BTSI) solenoid releasing the shift lever when you apply the brake. The sound is normal and won't hurt anything but I understand your concern.

Posted on Oct 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 pacifica that the shifter will not move out of park. when I push on the brake I can hear like a relay sound inside the console but the shifter will not move from park. Also my check engine...


Hi Mitch:
Sounds as if you have several problems. I'll try some ideas for you to consider.
SHIFTER LOCKED- Will engine start? Try starting engine, press on brake pedal, gently turn steering back and forth while trying to move shifter.
MISFIRE # 6 - Check wiring components. Spark plug tired, plug lead wire mar be shorting out.

Mar 11, 2015 | 2006 Chrysler Pacifica

1 Answer

Gear stuck on parking


do you hear a clickung sound everytime you step on the brake pedal?? get into the truck and be very quiet. turn on the key so the dash lights up and turn off all accessories such as radio and heat so its totally quiet in the truck hit the brake pedal and listen for clicking sound coming from shifter area. if no sound is heard at all than your solenoid to release the shifter from park is not working. start with doing the test and post results.

Nov 05, 2011 | 2001 Nissan Frontier Crew Cab

2 Answers

No breaklights and stuck in park


replace the stop lamp switch. It's right behind the brake pedal and it should take care of your problem. Double check it by listening for a clicking sound at the shifter when you step on the brake to release it from park. If you don't hear the clicking sound then its the stop lamp switch. If you do hear the clicking sound then you have two problems. The stop lamp switch and the shifter assembly. There is also a manual override for the shifter located right behind the shifter. Its the little spring loaded flap. Stick a pencil in there to release the shifter.

Oct 22, 2010 | 2002 Mercedes-Benz M-Class

2 Answers

2006 HHR with automatic transmission. I hear a solanoid clicking sound coming from the shifter area like a solinoid when I start the car and push the brake pedal before pressing the shift button and going...


This time only, your dealer is right. The sound is the Brake to Shift Interlock (BTSI) solenoid releasing the shift lever when you apply the brake. The sound is normal and won't hurt anything but I understand your concern.

Jul 30, 2010 | 2008 Chevrolet Hhr

2 Answers

My 2005 dodge magnum will not come out of park.. I checked the fuse.. brake lights work.. I cant find the shifter solenoid..can anyone help


it left chrysler in 2004 before that model came out but similar cars have the solonoid mounted in about the center of a cable that goes to the ignition lock mechanism and then to the shifter.look up under dash to the right of gas pedal. they used to be in that area

May 09, 2010 | 2006 Dodge Magnum

1 Answer

Wont go out of park


Do the brake lights work? You may have a defective brake pedal switch. There is a switch which knows if the pedal is depressed. If it's not depressed it will lock the shifter in place. That switch is located above the brake pedal under the dashboard. If the brake lights DO work, then you may have a problem with the solenoid that locks the shifter. When you press the brake, you should be able to hear a small click come from the gear selector. You can try to replace the brake switch if the brake lights don't work. Should only cost a few $$.

Dec 02, 2009 | 1998 Ford Escort

1 Answer

4.2l. Why is shifter stuck?


With the car started press on the brake pedal. Listen carefully for a "Click" sound coming from under the gear shift cover. If you do not hear one you will need to test the brake pedal switch, if you hear a click then most likely the lock somehow became disconnected from the solenoid. Remove the shifter cover and the assemble is can be seen for troubleshooting and repair.

Aug 14, 2009 | 2005 Jaguar S-Type

1 Answer

1993 Nissan Pathfinder XE-V6 right-side BRAKE PROBLEMS ????


THE CLICKING NOISE IS THE SHIFTER LOCK RELEASING, NOTHING TO DO WITH BRAKE LITES. CHECK FOR GOOD GROUNDS AT REAR LIGHT SOCKETS.

Jun 17, 2009 | 1993 Nissan Pathfinder

Not finding what you are looking for?
2006 Chrysler Pacifica Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...