Question about 1996 GMC Sonoma

1 Answer

1996 GMC Sonoma My high beam don't work, - 1996 GMC Sonoma

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 9,633 Answers

The combination switch on the steering column operates a relay located under the hood to operate the Hi beams. The body control module controls it's operation too.

Posted on Dec 13, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
tripletauto
  • 1450 Answers

SOURCE: 1996 GMC Sonoma heater core

the dash has to come out

Posted on Sep 11, 2008

  • 104 Answers

SOURCE: Right headlamp doesn't work on low beam only

in this case make sure you have voltage going to the low beam lights. 12 volts. you need a volt meter. if you do not have volatge you have to check and make sure power is going through the fuse. a bad fuse will be broke, but you can have a good fuse with no power going through it. if you have power going through the fuse you have a wiring open somewhere between fuse and whatever is between the headlight connecter.

plz check and get back i will keep checking on here on and off.

Michael
ASE certified
PLZ rate

Posted on Feb 09, 2009

  • 71 Answers

SOURCE: where is the fuel shutoff switch on a 1996 gmc sonoma?

no fuel shut off switch on pickups that i know of possibly bad fuel pump find your red bypass wire at relay to test pump

Posted on Mar 29, 2009

  • 1 Answer

SOURCE: high beam lights and driving lights don`t work

Hi,
I got my daughter a 2003 Pontiac Sunfire. They are a lot of electrical work.
The problem is the wiring harness which splits and travels under the battery and the windshield washer reservoir. The wires oxidize and fall apart.
The low beams will work but if you turn on the high beams the lights will go completely out, right?
If this is the case I can pretty much guarantee that you will have to remove the battery, the drivers side front inner fender, the air filter housing, the air throat, and the windshield washer reservoir. You will then be able to open the wiring harness feeding the headlights. The wire that feeds your high beams is a pink wire. Test the wires from the harness plug (located just under the battery) to a point as close to the headlight as you can, Use a simple continuity tester. Also feel and bend the wires. If the insulation cracks and you see a green or lite blue powder then patch a new wire in.
All in all I found 4-wires which I replaced. Everything works now.
Good Luck,
Jay

Posted on Jun 15, 2009

  • 1 Answer

SOURCE: Jeep Headlights not working. High beam works

had the same problem on my 92....check under the hood on the drivers side,towards the front,there is a "junction box" with all of the lighting wires connecting from the switches to the lights.My wires were all corroded inside,so I cleaned the ends and bought a new box from the local electronic supply store.The problem has not come back.

Cheers

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 GMC Sonoma high beams don't work


Check your high beam switch, if it doesn't make a clicking sound then it is possible you need to replace the high beam switch. I had the same problem with my car.

Dec 13, 2014 | Cars & Trucks

1 Answer

1996 Sonoma heater stopped working. only high speed if I hot wire it


the blower motor module is burn.or defect replace it and check for bad terminals at module

Oct 11, 2014 | 1996 GMC Sonoma

1 Answer

Dash lights


It could well be a break in the printed circuit behind the instrument panel or a dirty connection.

Mar 18, 2014 | 1996 GMC Sonoma

1 Answer

Low beam headlight drivers side don`t work. high beam it works.


Check tour bulbs first and replace if blown. If OK then check wiring backwards from light to dip switch.

Oct 05, 2012 | 1996 Ford Explorer

1 Answer

GMC Envoy 2003 SLT only the parking lights and fog lights work. The low beam and high beam don't work. Please help


Well, the problem is that I dont know the reason, you should investigate. There could be issues with lamps (must get new) or electricity problems (must head to auto-service)

Jun 29, 2012 | 2003 GMC Envoy

1 Answer

High rpm at start up un 1996 gmc sonoma


no it wont start if the cam sensor goes out check to see if there is a vac line off somwhere 9 times out of ten its a vac line

Oct 03, 2008 | 1996 GMC Sonoma

Not finding what you are looking for?
1996 GMC Sonoma Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...