Question about 1997 Chevrolet S-10 Pickup

1 Answer

I have a 1997 Chevy s10 I upgraded the headlights to h4 4656 the plug they sent with the headlights have red green and black wires and wires do I splice to the tan wire the light green wire and blue wire on the stock headlight plug

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 656 Answers

The black should be the ground, the other two are for low and high beam. Turn on lights and touch the wires to socket wires with low beam on. Then switch to high beam and touch remaining wire. Now if both are wired in and they function properly you all set to connect with crimp connectors. If not reverse the green and blue so high and low beams have the proper connection.

Posted on Dec 13, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 102 Answers

SOURCE: Headlight/turn signal problem

RELAY, NOISE SUPPRESION/is 1323592 its black and mounted under the hood on the shock tower, check page 4 and page 16 under LHB230FT in your book(item 464) ? why are you messing with this relay if you have a light problem ? does left turn signal stay on with key off /with parks only /with head lights /both front and back turns or front only? have you removed both frt and back bulbs together and ck voltage in sockets ?/wrong bulbs? i would need more info

Posted on Sep 02, 2008

SOURCE: headlight switch plug for 84 cj7

MY 84 CJ7 HAS THE SAME THING, THINK ITS JUST A EXTRA.

Posted on Sep 13, 2008

  • 231 Answers

SOURCE: headlight switch 1998 chevy s10 exended cab 4x4

try putting the emergency brake on and then put the head lite switch to the park lite position, if the head lites do not cme on then they are your daytime running lites. as for a larger altenator this depends on what amperare of one you have now, but in most cases you can get a higher amp. altenator. you will have to find out what amp yours is and any parts store will be able to get one for you.I assume you want the bigger altenator for charging an auxillary battery, ( camper, trailer, or you have lots of extralites on your vehicle ).
hope that you find this to be helpfull.

Posted on Oct 16, 2008

MNfisherman
  • 11896 Answers

SOURCE: 1995 Ford Windstar Speaker Coding Scheme.

www.installer.com as speaker schematics

Posted on Jan 17, 2009

seanpwright
  • 2030 Answers

SOURCE: Chevy s10 turn signal switch

All the wires will be in the steering column, be sure that you got the correct switch, you may have the wrong one.

Posted on Nov 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need to know all the color wiring diagram for a 1992 CHEVY S10 stereo


Much easier to buy an wiring adapter from stereo store. This way you can go back to stock when you decide to sell the car.

Jan 20, 2015 | 1992 Chevrolet S-10

1 Answer

How to replace mallory hei cap on a 454 chevy


orange and black wire go from ignition module to plug into coil in cap the 2 out side wires are green and red , red for power and green for tach.

Oct 12, 2014 | Cars & Trucks

1 Answer

Headlamp wiring


I'm going to start out by saying I don't know. But between the two of us we should be able to figure it out. I don't know how the wires are coming out of the new plug.
On the truck, the left headlight harness is white green, red black, and green black. White green is power, red black is the ground for the high beam, and green black is ground for the low beam.
On the right side, dark blue light green is power, and the other two are the same color as the left side.
If you look at the right side and figure out which terminal on the headlight the dark blue light green wire goes to, that is the same terminal you use on the left side for power. Then the other two wires are the same for both sides.
I can post a wiring diagram if you think it will help.

Jun 10, 2013 | 2002 Ford Escape

2 Answers

Headlights are cutting in and out on my 1997 chevy s10 and I don't know where to find the fuse ?


Not a regular fuse for headlights. Usually a relay that trips if it overheats and resets when it cools off. Often under the hood. Probably means you have a short circuit somewhere. A hot wire touching ground , often at rear of vehicle, Are your tailights still on ? If headlights and taillights go off together then problem is definately a short.

Nov 23, 2010 | 1997 Chevrolet S-10 Pickup

2 Answers

Cant seem to locate Drivers and passengers side Headlight assembly for 1997 Chevy S-10, 3door, 6 cyl.


even at a salvage yard? go to RCSR.com (Rancho Cordova Specialized Recyclers) and get their 800 number, tell them that a 928 Porsche guy from Tahoe sent you to them and I will bet they can ship the part to you in three days for a good price...if you mean locate in the engine compartment try removing the headlight first...

Oct 03, 2010 | 1997 Chevrolet S-10 Pickup

1 Answer

Looking for speaker and radio diagrams for 97 chevy S10? Thanks


THIS IS ALL I HAVE, HOPE IT FILLS THE BILL FOR U.

1997 Chevrolet S10 Pickup Truck Car Radio Stereo Audio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Gray
Car Stereo Dimmer Wire: Brown
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

Nov 11, 2009 | Chevrolet S 10 Cars & Trucks

1 Answer

Chevy s10 turn signal switch


All the wires will be in the steering column, be sure that you got the correct switch, you may have the wrong one.

Nov 09, 2009 | 1996 Chevrolet S-10 Pickup

1 Answer

Do you have a wiring diagram for headlight assy for 1997 chevrolet s10


take your vin# to chevy and they can give you diagram for your truck, the parts dept.

Sep 09, 2009 | 1997 Chevrolet S-10 Pickup

2 Answers

No tail lights


Try checking the headlight switch it may have broken contacts in it. Easy fix go to a salvage yard find same make and model truck, swap headlight switches.

Dec 27, 2008 | 1997 Chevrolet S-10 Pickup

1 Answer

1999 navigator


i know this worked with my 99 navigator 32 valve used a viper car starter.

Lincoln

Navigator

1997-2003

Remote Starter Wiring Colors and Notes

Function
Vehicle Color
Location

Start:
RED/LT. BLUE
IGNITION SWITCH HARNESS **

Ignition #1:
D BLUE/GREEN
IGNITION SWITCH HARNESS

Ignition #2:
GRAY/YELLOW
IGNITION SWITCH HARNESS

Ignition #3:
RED/BLACK
IGNITION SWITCH HARNESS***

Accessory:
BLACK/LT. GREEN
IGNITION SWITCH HARNESS

Brake Light:
L GREEN (+)
AT SWITCH ABOVE BRAKE PEDAL

Tach Signal:
WHITE/PINK
AT POWERTRAIN CONTROL MODULE *

Parking Lights:
BROWN (+)
AT HEADLIGHT SWITCH

Headlights:
RED/YELLOW (+)
AT HEADLIGHT SWITCH

OEM Alarm Disarm:
D GREEN/PURPLE (-)
DRIVER KICK PANEL

OEM Alarm Arm:
N/A


Diesel Glow Plug:



Clutch Bypass Wire:



Notes:
* Powertrain Control Module (PCM) Located On Passenger Side Of Engine Compartment On Passenger Wheelwell. This Wire Can Also Be Found At the Firewall Harness On the Driver's Side of Vehicle. ** This Vehicle Is Equipped With Ford's PATS Anti-Theft System. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. *** Must power ign3 using a relay. Tap relay coil to ign3 connection of remote start along with bypass module. No diode isolation is required.

Aug 07, 2008 | 1999 Lincoln Navigator

Not finding what you are looking for?
1997 Chevrolet S-10 Pickup Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...