Question about Cars & Trucks

1 Answer

What to do when your remote quits working that cranks your truck

Have checked fuses that I know to check and cleaned cable

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,585 Answers

Replace the battery in the fob. Have the fob check to see if it is working. If the receiver is bad replace the system or take it out. If you don't take it out, eventually it will mess up the security system and you won't be able to start the car with the key. I take them out all the time, when I see them. Starts the car every time..

Posted on Dec 13, 2014

Testimonial: "What is the receiver and where is it located"

  • Randy Ohler Dec 13, 2014

    You didn't say if it is factory or aftermarket. Factory is in the BCM. after market is under the dash, driver side, lots of wires and modules. There will be relays and fuses also.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What to do when your remote quits working that cranks your truck


The batteries in your remote are probably dead. Put in new batteries. Just use the key until you get new batteries.

Dec 13, 2014 | Cars & Trucks

1 Answer

What to do when my remote quits workingto crank my truck


could be the transmitter or remote starter itself, check the connections on your starter, they use cheap pinch on connectors that let your wires corrode and they also disolve because they are made from cheap metal, they can also destroy your ECU and cost you a fortune, some remote companys can try to start your vehicle remotlely via satellite, you can remove the switch they put on your starter and see if it works with 12 volt power, use a test light or a volt meter to see if it opens or closes, if it does its your transmitter for sure

Dec 13, 2014 | Cars & Trucks

2 Answers

Engine cranks will not start.gauges&lights will not work.


Sounds like a voltage drop somewhere

Check the battery cables and any other
ground terminals & fuseable links for
corrosion

If you know how to use a VOM Meter,
do voltage drop tests on cables,static
and cranking

Dec 19, 2010 | 1996 Chevrolet Blazer

1 Answer

06 jeep commander wont crank. No interior lights, no headlights, and when I put the key into the start position to crank it nothing happens. No clicking or sounds that make me think it is trying to turn...


Check your battery cables. Remove them and clean the contacts, if the ends are replacements take them apart and clean. Use a wire brush or sand paper. Make sure you remove the negative first and reinstall it last. Also check the battery and fuse links. Your problem is in there some where the battery, cable ends, cables, or a fuse link. If still no start let me know the results and we can go from there if need be.

Sep 20, 2009 | 2006 Jeep Commander

1 Answer

Cruise will not set. check fuse check ok need


Need to check the cable they get loose and quit working also check for a vacumn leak

Jun 05, 2009 | 1994 Dodge Dakota Club Cab

2 Answers

Will not start


Sounds like the MAIN FUSE has blown .
I would check the MAIN FUSE in the fuse box under the hood. It's going to be the one with the most amps. It might be 80 amps or so.

Apr 29, 2009 | 1984 Toyota Camry

1 Answer

Won't start.


Check the fuel pressure.

Mar 17, 2009 | 1994 Dodge Dakota Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...