Question about 2000 Chevrolet Suburban

1 Answer

My remote quit working on my 2000 saburbon.I can hear it make a noise when I press the button but it wont turn over

I tokk the battery post a loose one time and put it back on and it worked once but not now

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Expert
  • 129 Answers

Bad connections at battery cables. Check both ends and make sure they are tight.

Posted on Dec 13, 2014

Testimonial: "I did that.it cranks fine with the key just not the remote"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote starter comes only briefly and shuts off


Factory Remote Starter Quits After 5 Seconds - Diesel Place ...

www.dieselplace.com/.../340832-factory-remote-starter-quits-after-5-sec...

Nov 23, 2009 - 11 posts - ‎8 authors
On my 2007.5 Duramax, the factory remote has been working fine ... I tried this morning again with the remote starter while sitting in the truck and same thing, turned off ....2008 Silverado 2500 HD CCLB Duramax 6 Spd Allison 4X4 Z71 ... shut off engine", basically its doing it foryou as your not in the truck to ... check engine light on wont shift
7 posts
Oct 28, 2011
remote start
11 posts
Oct 14, 2008
More results from www.dieselplace.com

Factory Remote Start Problem - 1999-2006 & 2007-2013 Chevrolet ...

www.gm-trucks.com/forums/topic/114985-factory-remote-start-problem/

Jun 12, 2010 - 10 posts - ‎8 authors
Factory Remote Start Problem - posted in 1999-2006 & 2007-2013 ... Sounds like you may have an intermittant code coming in and the dealer should be able to pull it out.2008 Sierra SLT ECSB Z71, Corsa Touring, and GMPP CAI .... the remote start button again the truck WILL shut off and the only way to ... Burning smell, white smoke - 2014 / 2015 / 2016 ...
15 posts
Jan 11, 2014
2008 Silverado Electrical Issue
15 posts
Aug 19, 2012
Making Factory Remote Start Run Longer
15 posts
Dec 21, 2010
2000 Sierra, Starts Then Dies - Code 1631
7 posts
Dec 4, 2008
More results from www.gm-trucks.com

Jan 05, 2016 | 2008 Chevrolet Silverado 2500HD

1 Answer

How can i know if my starter relay is bad on a dodge stratus 2001


IF STARTER RELAY BAD THE STARTER WONT MAKE NO NOISE AT ALL HEADLIGHTS WONT DIM.IF YOU CLICKING NOISE BATTERY VOLTAGE TOO LOW. MAKE SURE BATTERY VOLTS ARE 12.6 VOLTS AND USE TEST LIGHT TO SEE IF STARTER GETTING POWER.COULD HAVE BLOWED IGNITION FUSE OR FAULTY IGNITION SWITCH. TO CHECK STARTER SOLENOID FIRST TURN OFF RADIO THEN REMOVE NEGATIVE BATTERY CABLE AND POSITIVE BATTERY CABLE.THEN REMOVE STARTER BUY A REMOTE SWITCH.YOU NEED BATTERY JUMPER CABLES HOOK BATTERY JUMPER CABLES TO BATTERY PUT POSITIVE CABLE ON POSITIVE BATTERY POST THEN PUT NEGATIVE BATTERY CABLE ON NEGATIVE POST. HOOK BATTERY CABLES TO STARTER USE NEGATIVE CABLE GROUND STARTER BODY AND PUT POSITIVE BATTERY CABLE ON THE LARGE POSITIVE POST ON STARTER SOLENOID. NOW TAKE REMOTE SWITCH HOOK RED WIRE TO STARTER SOLENOID POSITIVE POST THEN HOOK BLACK WIRE TO REMOTE SWITCH TO STARTER SOLENOID SWITCH TERMINAL WITH LETTER S THEN PRESS REMOTE IF STARTER SPINS STRONG WITH A GOOD KICK STARTER GOOD.YOUR PROBLEM COULD BE CORRODED WORN BATTERY CABLES. WEAK BATTERY FAULTY IGNITION SWITCH. IF STARTER DONT WORK WHEN YOU PRESS THE REMOTE SWITCH STARTER SOLNOID BAD OR STARTER ITSELF BAD.IF ALL IS GOOD. CODE SCAN CAR FOR THEFT SECURITY FAULT CODE.

Aug 28, 2011 | 1999 Dodge Caravan

1 Answer

My spotlights for a bmw e46 320 coupe wont work but if i remove the bulb and holder and fiddle with it on voth sides it will work ,,so i put it back into the holder working and turn off the lights and back...


Hi obviously your fuse is ok as you can hear power going to the fuse box when you hit the switch hence the clicking noise, i suggest you check the connections on the back of the fog lamp and make sure they are not loose as this is a common fault, if they are loose simply secure them and your done.
Hope this helps
Steve

Mar 03, 2011 | BMW 323 Cars & Trucks

2 Answers

When i press the unlock or lock button on my car key, nothing happens(i have fitted in a new battery in my key)


with your key in hand disconnect the veichle earth terminal on the battery, while depressing the open door button on the keyfod at all times reconnect the battery earth while holding button down, after a few seconds you should hear the doors opening/closing.then relese the button,tighten the earth terminal on the battery and that should be you..

Jan 30, 2010 | 2000 Ford Focus

1 Answer

2001 ml320, remotes quit working. new batteries,


Synchronization
Turn ignition switch to position II. Turn ignition switch to position 0 and remove key. Within 1 minute: Press and hold key lock button. Press unlock button 5 times. Remote control should now operate system. If not: Repeat procedure.
Programming
When
Key remote control added or replaced. System malfunction.
How
Keys can only be programmed using diagnostic equipment

Jan 09, 2010 | 2002 Mercedes-Benz C-Class

1 Answer

My cental locking on my focus 2000 reg does not work, i can only open the doors with key individually, also i cannot open my boot from inside, the boot light stays on as well as the light in the car saying...


programming of remote :- ( you will need all your remotes for this )
insert a programmed key into the ignition.
turn key to position 2 & back four times within 6 second.
when you turn the ignition off after the fourth turn you should hear a beep to tell you your in programming mode for the next 10 seconds.
press any button on your new remote ( a tone will be heard when the car accepts the button press ) now do the same with your old remotes too.
either switch the ignition back on or wait until the timer runs out on the programming mode & your done

Dec 23, 2009 | 2000 Ford Focus

1 Answer

2000 Mercedes ML430 Battery Change Failed


you have to resynch your remote once it looses power. the procedure is in your owner's manual. It can also be done from a scan tool but you would have to take the car to a shop. I beleive you hold the lock button and press the unlock button 5 times within 10 seconds and then put the key in the ignition but I cannot remember year for year procedures

Jun 17, 2009 | Mercedes-Benz ML-Class Cars & Trucks

1 Answer

My keyless remote for my 2000 jeep grand cherokee wont unlock the


go to autozone and use the remote tester on the counter to make sure that the remote itself is functioning or not, could be a dead battery. On some vehicles it is possible to reset the keyless entry by turning the ignition switch from off to run (right before the starter activates) 3 times or so, if you try this and the door locks activate then press the lock button on your remotes. good luck

Jun 03, 2009 | 2001 Chevrolet Blazer

1 Answer

Ford Focus T Reg (UK) Key Fob Not Working.


it might be the 60 amp black fuse my partner just said

Apr 13, 2009 | 2000 Ford Focus

Not finding what you are looking for?
2000 Chevrolet Suburban Logo

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...