Question about 1998 Ford Crown Victoria

2 Answers

LOCATION OF STATER RELAY SWITCH ON A 1998 CROWN VIC

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Ford Master
  • 518 Answers

Starter Relay is In High Current Relay Center (left rear of engine compartment)

Posted on Dec 12, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 3,245 Answers

Do you have an owners manual? Your manual should give the fuse box ID. Should be in underhood power distribution center. Click on the link, number 2 at the bottom. You can go to fordparts.com click on the pro link, then tech resources. In the left column click on proper link for owners manual.

http://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/98croog1e.pdf

Posted on Dec 12, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 crown vic radiator fan relay location


For 99 model year, in under hood fuse box.
Number 3 says relay in the picture
#17 says circuit breaker
#13 says, high speed
I found this info in your owners manual.

26285654-cqyld1dp2znsjrbvlbuk4h2d-4-0.jpg

Sep 18, 2016 | 1999 Ford Crown Victoria

1 Answer

Fuel pump relay location


Yes In the trunk of some of the Crown Vics there is a switch next to the air ride control. It is called an Inertia switch and has a reset button. If you do not find this switch in the trunk, you will find it behind one of the kick panels above the front seat floorboard. It will sometimes activate by mistake with an impact.

The fuel pump relay should be in a Relay trio that is piggy-back to the Powerbox under the hood on the driver's side. There are plastic clips on one end which when pressed will allow the Relay trio to slide out of the case and towards the engine.

Oct 22, 2013 | Ford Crown Victoria Cars & Trucks

1 Answer

I need a diagram that shows where the starter solenoid that is not on the starter is located, so i can try to manually bypass it and start my 1996 ford crown vic police package, go to parts store for new...


look for a relay in the under hood fuse box location for one that says starter, or IGN,, there are usually other relays the same,l so switch two and see if that helps your problem, if so,, replace the bad relay

Sep 10, 2011 | 1996 Ford Crown Victoria

1 Answer

LOCATION OF THE STARTER MOTOR RELAY AND THE LOCATION OF THE FUEL PUMP RELAY SWITCH ON A 1984 CROWN VIC. IT HAS'NT BEEN STARTED IN A FEW YEARS AND WE ARE TRYING TO TRACE THE PROBLEM


the starter relay is by the battery , follow the positive cable to it. that car should have a FUEL PUMP INERTIA switch. in the trunk, it should be well marked

Sep 01, 2011 | Ford Crown Victoria Cars & Trucks

1 Answer

My 1998 crow Vic engine came the cooling fan for the engine is not working when you turn the car on.


I'll assume the car is at operating temperature. Try locating the cooling fan fuse under the hood. If that is good, the temperature/fan switch is bad. If that checks good, the relay might be the problem, but not likely. These switches are a common problem.

Mar 03, 2011 | 1998 Ford Crown Victoria

1 Answer

HOw to disable drl on 2010 ford crown vic?


check your owners manual for location of relay take out relay

Jun 02, 2010 | 2005 Ford Crown Victoria

1 Answer

Cant start my crown vic 1998


ignition switch or starter relay or a wiring problem

Oct 03, 2009 | 1998 Ford Crown Victoria

1 Answer

No high beams on my 96 crown vic. fuses good. any suggestions?


look under the hood in the big fuse panel and look for High beam headlight relay the relay is more than likely bad

Jun 17, 2009 | 1998 Ford Contour

2 Answers

Location of fuel pump relay on a 2001 Ford Crown Vic


where is the fuel pump relay on a 2001 crown vic p71

Jan 10, 2009 | 2001 Ford Crown Victoria

Not finding what you are looking for?
1998 Ford Crown Victoria Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...