Question about 1998 Toyota Camry

2 Answers

I have New Keyless entry remote for my 1998 Toyota camry. FCC ID-ELVAT6B, but do not have programming instruction.

I have not tried anything yet as i do not have any instruction.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 228 Answers

Ok, as a retired alarm installer let me see if I can help you. Unfortunately the fcc id nmbr. Does not help identify what your dealing with. Factory alarms( from toyota) were very rare in that vintage. If I had to bet, its likely your alarm is aftermarket. Here are some ways to tell/identify what you have. 1. Do you have a siren? 2. Do you have an LED mounted in the dash(not the instrument cluster) or in a pod underdash? If yes your alarm is aftermarket. Now its a matter of who made it. The ez thing to do is stop by a neighborhood alarm shop and they can what brand it is. Once you know that programing will be ez. If you can get me more info. I can assist you better.

Posted on Dec 22, 2014

  • _-__-___-_
    _-__-___-_ Dec 22, 2014

    x2, id the maker of alarm, 1st. oem or aftermarket.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 20,706 Answers

Why not read the operators guide in the glove box.
if missing?, get one.
or if really savvy, get the FSM , the factory service manual
get it read it and , bingo its all there, every word.
most cars, you need 1 key or 2 to make a new key, DIY.
that too is covered. , in the FSM.

Posted on Dec 13, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Program a new keyless entry remote for a 1995 toyota corolla? I have followed the instructions but it is not working


dealship has to introduce the new key to the car before you can code it in yourself

Dec 26, 2014 | 1995 Toyota Corolla

1 Answer

Need Programming instruction of ELVAT6B Keyless entry remote


the operators guide cover this.
hot reprogram key fobs , all cars. have the book in the glove boxl
and tells you how many keys you must have (WORKING) TO make a new key, some take 2 or 3 key s to DIY..

ask toyota for the guide. its free sometimes. (i wax safety issues and bam free, tell engine will not idle can car is dangerous.. bam. free guide.)

or go to , "buy a new key fob dot com." goggle finds them easy.
pretend to buy and aftermarket key
and bam free instructions. wow huh:?

Dec 19, 2014 | 1998 Toyota Camry

1 Answer

Programming keyless entry key fob for 2000 chevy


you need to call the nearest chevy dealer with you vin, and get the part number from them, there are 2 numbers on the back of the remote, see if they match what the dealer tells you. Have an automotive locksmith program, should cost about 75.00 to do.

Jan 27, 2010 | 2000 Chevrolet Malibu

2 Answers

Hi. Do you what the FCC ID is for the Nissan Versa (Tiida) 2006. I am trying to purchase a new keyless remote. Thanks. RJ


I believe that with most keyless entry systems, you must buy the remote specific to Nissan Versas, and then either take it to a dealer to have them program your in-car receiver to understand the new remote signal, or download the instructions and add it yourself. FCC ID should have absolutely bearing on this.


Dec 04, 2009 | 2006 Nissan Versa

2 Answers

Programming instructions for keyless remote Does anyone have the programming instructions for 1998 honda passport keyless remote (FCC #HYQ1512R)?


Get into your passport and unlock all doors. Leave drivers door open. Put key into ignition. Turn to ON (not start), then OFF three times within 5 seconds. Close and open the drivers door twice. Turn key to ON then OFF 5 times within 5 seconds. Close then open the drivers door. Press either the lock or unlock button on the remote. Doors will lock then unlock. Press the button again. Doors will lock then unlock again. Close door to finish programming. If it doesnt work, try it again but turn the key faster. You have to do it all pretty quick, but I had it done on the second try.

Oct 03, 2009 | 1998 Honda Passport

2 Answers

Instructions to program 1999 Toyota keyless transmitter


sit in car all doors closed put key in ignition and turn from OFF to ACC 3 times as fast as you can leaving it in ACC on the last cycle then press your remote button. your blinkers should flash to tell you this has worked.... may take you a couple of tries to get it!!

Mar 17, 2009 | 1999 Toyota Camry

1 Answer

Need of programming instructions for keyless entry for 1996 LHS


System operation
System will automatically lock all doors when vehicle is driven in excess of 15 mph
Pressing UNLOCK (on remote) once deactivates system and unlocks driver door only
Pressing UNLOCK (on remote) twice w/in 5 seconds deactivates system and unlocks all doors
Alarm/central locking functions can be altered using remote transmitter


Programming

Access data link connector (DLC)- druvers sude fascia
Switch ignition on
Jump DLC terminal 1 and ground
Ensure doors lock and unlock, indicating programming mode active
Press any button of each remote to be programmed
Ensure doors lock and unlock after each remote operation - indicating programming complete
Remove jump lead to exit programmming code

A maximum of two remotes can be programmed

Jan 20, 2009 | 1997 Chrysler LHS

Not finding what you are looking for?
1998 Toyota Camry Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...